Manual

Air Conditioner Features

(continued)

TO USE AUTO COOL FEATURE: YOU WmLLSEE:

__pDO THINS:

RESS AUTO

COOL

LIGHT On

Note: Fan starts at High Speed and adjusts to a slower speed as the

room temperature dictates, For example if the room doesn't get too

warm, it will stay at the slowest speed, If the room temperature rises

quickly, such as a door being opened, it will automatically go to the

highest speed, The fan speeds will re-adjust back to the slowest speed

as the room returns to the original set temperature, Press either the

fan slower or fan faster button to adjust the fan speed manually,

TO OPERATE ON FAN ONLY: YOU WILL SEE:

DO THmS:

PRESS MODE

I BUTTON

CHOOSE FAN

ONLY

//_No LIGHT On

re: Use this function only when cooling is not desired, such as for

room air circulation or to exhaust stale air, (Remember to open the

vent during this function, but keep it closed during cooling for maximum

cooling efficiency,) You can choose any fan speed you prefer,

During this function, the display will show the actual room temperature,

not the set temperature as in the cooling mode,

TO USE THE ENERGY SAVER

FEATURE: YOU WILL SEE:

DO THIS:

PRESS MODE

BUTTON

CHOOSE

ENERGY SAVER

LIGHT On

Note: In this mode, the fan will continue to run for 3 minutes after the

compressor shuts off, The fan then cycles on for 2 minutes at 10 minute

intervals until the room temperature is above the set temperature, at

which time the compressor turns back on and cooling stars,

SZ000302(En)-YaoKong(1018) 7 _ 10/25/2004, 2:33 PM