Manual

Air Conditioner Features
(continued)
SLEEP FEATURE: YOU WILL SEE:
DO THIS: 1
PRESS SLEEP
BUTTON
_ LIGHT On
Note: In this "MODE" the seIected temperature will increase by
2 degrees F 30 minutes after the mode is selected. The
temperature will then increase by another 2 degrees F after an
additional 30 minutes. This new temperature witI be maintained
for 7 hours before it returns to the originally selected
temperature. This ends the "Sleep" MODE and the unit witI
continue to operate as originatly programmed. The "Sleep"
MODE program can be cancelled at any time during operation
by again pressing the "Sleep" button.
CHECK FILTER FEATURE: YOU WILL SEE:
LIGHT On
Note: This feature is a reminder to clean the Air Fitter (See
Care and Cleaning) for more efficient operation. The LED (tight)
wiII iIIuminate after 250 hours of operation. To reset after
cleaning the filter press the "Check FiIter" button and the Iight
will go off.
CLEAN AIR FEATURE
(on some models):
YOU WILL SEE:
DO THIS:
LIGHT On
Note: When this feature is "ON". the electronic air purifier is
_rgized to remove pollen and impurities from the air. To cancel
this feature, press the Clean Air button (the LIGHT will turn
off).
Note: This feature can be activated on the unit touchpad ONLY.