Manual

AIr Conditioner Features
(continued)
TO USE AUTO COOL FEATURE:
_ii¸¸_,_- I?
© @
__p RDO THIS:
ESS AUTO
COOL
BUTTON
YOU WILL SEE:
© @
,_'_':i_:!i?ii!!::i¸
//_Not LIGHT On
e: Fan starts at High Speed and adjusts to a slower speed
as the room temperature dictates. For example if the room
doesn't get too warm, it will stay at the slowest speed, if the
room temperature rises quickly, such as a door being opened,
it wi[I automatically go to the highest speed. The fan speeds
will re-adjust back to the slowest speed as the room returns to
the original set temperature. Press either the fan slower or fan
faster button to adjust the fan speed manually.
TO OPERATE ON FAN ONLY:
DO THIS:
PRESS MODE
11 BUTTON
CHOOSE FAN
ONLY
YOU WILL SEE:
LIGHT On
Note: Use this function only when cooling is not desired, such
as for room air circulation or to exhaust stale air(on some
models). (Remember to open the vent during this function, but
keep it closed during cooling for maximum cooling efficiency.)
"Youcan choose any fan speed you prefer.
During this function, the display wilI show the actuaI room
temperature, not the set temperature as in the cooling mode.
TO USE THE ENERGY SAVER
FEATURE:
O
@
\
/
DO THIS:
/PRESS MODE
BUTTON
CHOOSE
ENERGY SAVER
YOU WILL SEE:
© @
LIGHT On
Note: In this mode, the fan wiI! continue to run for 3 minutes
after the compressor shuts off. The fan then cycles on for 2
minutes at 10 minute intervals untiI the room temperature is
above the set temperature, at which time the compressor turns
back on and cooling stars.
SZ000400(En)-Yaokong 7 12/10/2004, 5:36 PM