Manual

Air Conditioner Features

(continued)

TIMER: DELAY STOP / START

FEATURE YOU WiLL SEE: TIMER SETTING

DO THIS:

PRESS

TIMER BUTTON

LIGHT On

Note: For Delay Stop, the unit must be in the On position.

Note: For Delay Start, the unit must be in the Off position.

To adiust timer setting, tap or hold the UP arrow(A) or the DOWN

arrow(V) to change delay timer at =5hour increments, up to 10

hours, then at 1 hour increments up to 24 hours. The control

will count down the time remaining until start (8, 7.5, 7, etc.).

The Delay Start mode automatically seiects cooling with

maximum Fan Speed. The temperature maintained wiII be the

same as previously set. To change the set temperature, press

"COOL" then Up or Down arrows until the desired temperature

is indicated on the display. After 5 seconds, the controI will

automatically change the dispIay back to the hours remaining

until the unit wiII start/stop. Turning the unit "ON" or "OFF" at

any time will cancel the Delay StaWStop function.

SLEEP FEATURE: YOU WiLL SEE:

f DO THIS:

PRESS SLEEP

BUTTON

/ot LIGHT On

e: In this "MODE" the selected temperature will increase by

/ 2 degrees F 30 minutes after the mode is selected. The

// temperature_._._will then increase by another 2 degrees F after an

additional 30 minutes. This new temperature will be maintained

for 7 hours before it returns to the originally selected

temperature. This ends the "Sleep" MODE and the unit will

continue to operate as originally programmed. The "Sleep"

MODE program can be cancelled at any time during operation

by again pressing the "Sleep" button.

SZ000302(En)-YaoKong(1018) 8 _ 10/25/2004, 2:33 PM