Manual

Air Conditioner Features

(continued)

TO TURN UNiT ON:

NOTE: The following instructions represent the Touch Pad, the same instructions

can be used for the Remote Control

YOU WiLL SEE:

__ DO THINS:

PRESS ON/

OFF PAD

• J

TO CHANGE TEMPERATURE

SETTING:

YOU WILL SEE:

DO THINS:

PRESS TO

RAFSE

PRESS TO

LOWER

• J

Note: Tap or hold either up( A ) or down( V ) button until the

desired temperature is seen on the display. This temperature

wiII be automatically maintained anywhere between 60°F (16°C)

and 90°F (32°C)= If you want the display to read the actual

room temperature= See "To Operate on Fan Only" section on

Page 7=

TO ADJUST FAN SPEEDS:

DO THIS:

PRESS TO

SELECT:

FASTER

SLOWER

YOU WILL SEE:

• J

A 2 Digit DispIay is used to indicate the Fan Speed setting,

from 10 through 99. When the "SLOWER" button is pressed

the motor speed will slow down at multiple intervals (90 distinct

settings), to a minimum setting of 10. To speed the motor up,

press the "FASTER" button= The speed will increase at multipIe

intervals to a maximum setting of 99=After 5 seconds the control

wilI automatically change back to displaying the set temperature=

SZ000302(En)-YaoKong(1018) 6 _ 10/25/2004, 2:33 PM