Manual

Operating Instructions
(continued)
TO CHANGE TEMPERATURE SETTING: YOU WILL SEE:
tamp/timer
auto
hi _ fittermad
lo reset
V 0N-OFF A FAN SPEED steep
tamp/timer
auto 1
hi m fitterreed
lo reset
V 0N-0FF A FAN SPEED steep
TO LOWER
Note: Tap or hold either up ( A ) or down ( V ) button until
the desired temperature is seen on the display. This tempe-
rature will be automatically maintained anywhere between
16 °C (60 °F) and 32 °C (90 °F). If you want the display to
read the actual room temperature. See "To Operate on Fan
Only" section on Page 7.
TO AD3UST FAN SPEEDS:
tamp/timer
auto
hi = fittermed
lo reset
V 0N-OFF A FAN SPEED steep
YOU WILL SEE:
tamp/timer
auto 1
hi fittermed
to R reset
V ON-OFF A FAN SPEED steep
\
DO THIS:
PRESSTO SELECT
TO USE AUTO FAN FEATURE:
tamp/timer
auto
hi
med
lo =
V 0N=OFF A FANSPEED
fitter
reset
steep
YOU WILL SEE:
tamp/timer
auto n J
hi fi[termad
lo reset
V ON=OFF A FAN SPEED steep
DO THIS:
PRESSFAN BUTTON,
CHOOSE AUTO
Note: Fan starts at High Speed and adjusts to a slower
speeds the room temperature dictates. For example, if the
room doesn't get too warm, it will stay at the slowest speed.
If the room temperature rises quickly, such as a door being
opened, it will automatically go to the highest speed. The fan
speeds will re-adjust back to the slowest speed as the room
returns to the original set temperature. Press either the fan
slower or fan faster button to adjust the fan speed manually.
@2009 Electrolux Home Products, Inc. All rights reserved.