Manual

ManualsBrandsFrigidaire ManualsRoom air conditionerOfficial Frigidaire room air conditioner

Operating Instructions

(continued)

TO CHANGE TEMPERATURE DISPLAY:

temp_timer

cool auto

menergy saver mhi

fan only lo

DO THIS:

PRESSAND HOLD

THE UP/DOWN

BUTTONS TOGETHER

FOR 3 SECONDS

YOU WILL SEE:

temp/timer

cool auto

menergy saver mhi

#n only lo

Note: The control is capable of displaying temperature

in degrees Fahrenheit or degrees Celsius.

FAULT CODES

temp/timer

cool aut_

menergy saver mhi

jan only lo

\ /

If the display reads "AS",

a sensor has failed. Contact

your Authorized Frigidaire

Service Center.

TO TURN UNIT OFF:

temp/timer

cool autc

energy saver hi

ADDITIONAL THINGS YOU SHOULD KNOW

Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.

• The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. /_

This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue

to run during this time.

• There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility of having

to roll through to select another mode.

• The control will maintain the set temperature within 1 degrees Celsius, between 16 °C and 32 °C.

• After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.

AUGER WHEELS

Air Directional Louvers

Air directional louvers control air flow direction. Your air conditioner has the louver

type described below.

Auger Type

The louvers will allow you to direct the air flow Up or Down and Left or Right

(8-WAY) throughout the room as needed. Rotate the Auger Wheels until the desired

Left/Right direction is obtained. Pivot horizontal louvers until the desired

Up/Down direction is obtained.