Manual

ManualsBrandsFrigidaire ManualsRoom air conditionerOfficial Frigidaire room air conditioner

Using Air Conditioner

To begin operating the air conditioner, foltow these steps:

1. Set the temperature selector to the highest number (coldest or coolest setting).

2. Set the mode control to the highest COOL setting.

3. Adjust the louvers for comfortable air flow (see Air Directional Louvers).

4. Once the room has cooled, adjust the temperature selector to the setting you

find most comfortable.

Review the "Operating Instructions" section for other settings.

Operating Instructions

TEHPERATURE

Max Cool 7 1

Low

Fan

Low _.=..=._ t

Cool_

High

tan

RODE

The controls featured in this manual are representative of many available

models. Your model may offer slightly different features.

Temperature Selector

This is used to set the desired room temperature when the unit is being

operated in the "COOL MODE".

To set the desired room temperature, rotate the selector switch to the desired

setting. After the set temperature is achieved, the thermostat will automatically

start and stop the compressor in order to maintain the desired set temperature.

Rotate the temperature selector clockwise for higher cool setting. Higher cool

settings will provide lower room temperature.

Rotate the temperature selector counter-clockwise for lower cool settings.

Lower cool settings will provide higher room temperature.

Cool Hode

The desired cool setting is selected by rotating the MODE knob to the appropriate location.

"high cool" has maximum cooling effect and airflow.

"low cool" has minimum cooling effect and airflow.

Note:If your unit is equipped with a vent handle, keep it closed for maximum efficiency.

Fan lode

Rotate the MODE knob to select your choice of fan speeds for air circulation only.

Note: When selecting a fan speed, the compressor wilt not run.

Please always wait 3 minutes when turning unit off then on again, and when changing from cool to fan and back to

cool. This prevents compressor from overheating & possible circuit breaker tripping.

Failure to follow these instructions may be harmful to your unit.

(2-WAY) -_

AUGER WHEEL

Air Directional Louvers

Air directional louvers control air flow direction. Your air conditioner has the louver

type described below.

Auger Type

Rotate the Auger Wheel until the desired Left/Right direction is obtained.