Brochure

The widest cooling & heating range
in the industry with only two models
Variable speed technology gives you the exibility of a full
line of PTACs with only two models, and offers the highest
available capacity of any 42 x16 PTAC on the market at
over 17000 Btus.
The Friedrich Inverter variable speed compressor matches
the unit output to the actual demand of the space for
increased comfort and lower energy consumption.
• The 9000 Btu MODEL can operate as low as 6462
Btus and as high as 12099 Btus.
• The 12000 Btu MODEL can operate as low as 7929
Btus and as high as 17142 Btus.
That's like getting multiple PTACs in one.
Packaged Terminal Heat Pumps
Patents-pending technology uses the
inverter compressor and main cooling
system to optimize temperature and
humidity level of incoming air.
By introducing make-up air directly
into the guestroom, rooftop central
fresh air systems can be considerably
downsized to service only the common
areas of the property.
This greatly reduces the cost and com-
plexity of hotel design and construc-
tion. Unlike other PTACs, the FreshAire
PTAC utilizes the main evaporator coil
and Merv 8 filters to truly condition
and filter the outside ventilation air.
*With makeup air active (door open)
FreshAire system helps achieve ASHRAE 62.1-2013 requirements, and brings up to 52 CFM of
conditioned, MERV 8 ltered, outside air into the space.
The most advanced PTAC ever. Delivers the best STC ratings* in the industry
of units with true make-up air capability.
9
FreshAire PTAC
9000 Btu model
Up to 12.9 EER
12099
6462
MAX. Btu
MIN. Btu
FreshAire PTAC
12000 Btu model
Up to 12.3 EER
17142
7929
FRESHAIRE OPERATING BTU RANGE
MAX. Btu
MIN. Btu
Make-up air passes
through Merv 8
lter, then mixes
with return air.
Return air