Specification

Shower Rods
MATERIALS: 176 tubing is 1" O.D. X .015 (28 gauge) type 430 polished stainless steel.
177 tubing is 1" O.D. x .015 (28 gauge) bright aluminum. Flanges for 176
and 177 are galvanized steel hanger type with concealed screw type 430
polished stainless steel covers. Holders for 176H and 177H are chrome
plated zinc die cast (Zamak) adjustable tension mount type with rubber discs.
Holders for 176HP and 177HP are chrome plated ABS plastic adjustable
tension mount type with rubber discs.
INSTALLATION: Install hanger type flanges and rod with 4 - #8 X 1-1/4" round head zinc plated
steel screws provided. Cover flanges to be on rod before installation of
hangers and rod. Slide cover flanges over hangers to complete installation.
Install adjustable tension mounted holders and rod by sizing rod 1-5/8" shorter
than wall opening. Insert rod into holders and tighten into position with
counterclockwise motion on threaded holder until secure.
OPTIONAL FASTENER INFORMATION:
Wood blocking is preferable behind all wall surfaces where screw-in installation
is used (176, 177). If wood blocking is not available, the following fasteners are
suggested: Tile/Masonry - Plastic or Lead Anchors, Plaster/Drywall - Toggle Bolts.
SPECIFICATION: Surface mounted shower rod shall be model ____________________________
(fill in model number) by Liberty Hardware Manufacturing Corporation.
SHOWER ROD - 176 & 177 SERIES
TECHNICAL DATA
5', 6'
5', 6'
5', 6'
5', 6'
5', 6'
5', 6'
177HP
177H
177
176HP
176H
176
DIM "A"MODEL#
1-3/4"
44 mm
"A"
2-3/8"
60.3 mm
3/4"
19 mm
2-1/2"
64 mm
1/2"
13 mm
1-3/4"
44 mm
1-3/4"
44 mm
1-3/4"
44 mm
5/8"
16 mm
1" O.D.
25 mm
Liberty Hardware Manufacturing Corporation • 140 Business Park Drive • Winston-Salem, NC 27107 • 800.542.3789 • www.libertyhardware.com
©2009 LHMC, A Masco Company