User's Manual

individual switches that left (on) and right (off). The following values will
help you in setting the channel.
The following guide will be show switch positions from left to right, but should
be transcribed as top to bottom for deployment on the actual DIP switch. The
words ON or OFF reflect the state of the switch needed to achieve the desired
channel:
NOTE: Unlike the TX-200 transmitter, the TX-500 will not be able to
control FOXPRO units such as the FX3, FX5, Scorpion, etc.
7.0 TX-500 and FURY CUSTOMIZATIONS
The TX-500 and Fury have many features—most of which can be customized
to work in a manner conducive to your specifications. This section will examine
the menu system in detail and explain the available customizations that you
can perform.
7.1 CALLER CONTROL MENU
This menu allows you to select how the Fury will operate. From speaker
selections, mono or stereo playback, and AUTO-V—use this menu to get the
Fury working the way you want it.
Speaker Control
This menu allows you to turn the front and back speakers on or off. To
change the speaker settings, use the selector to highlight the desired option
then press down on the selector knob one time:
FRONT ON - FRONT OFF
REAR ON - REAR OFF
NOTE: By default, both speakers will be set to ON. The front
CHANNEL SWITCH POS. CHANNEL SWITCH POS.
1 OFF,OFF,OFF,OFF 9 ON,OFF,OFF,OFF
2 OFF,OFF,OFF,ON 10 ON,OFF,OFF,ON
3 OFF,OFF,ON,OFF 11 ON,OFF,ON,OFF
4 OFF,OFF,ON,ON 12 ON,OFF,ON,ON
5 OFF,ON,OFF,OFF 13 ON,ON,OFF,OFF
6 OFF,ON,OFF,ON 14 ON,ON,OFF,ON
7 OFF,ON,ON,OFF 15 ON,ON,ON,OFF
8 OFF,ON,ON,ON 16 ON,ON,ON,ON