Wi-Fi Indoor Plug FS-IP100 Quick Start Guide
What’s in the Box Wi-Fi Indoor Plug FS-IP100 Quick Start Guide Wi-Fi Indoor Plug Quick Start Guide
Safety Instructions • Be sure there are no exposed wires from the wall outlet or Wi-Fi Indoor Plug before installation. • Your Wi-Fi Indoor Plug is intended for indoor use only. • Do not tamper with or make any modifications to your Wi-Fi Indoor Plug. • Do not insert your Wi-Fi Indoor Plug into a wall outlet if the device or wall outlet is wet or there is moisture around the desired area of installation. • Plug directly and completely flush into the wall outlet.
Wi-Fi Indoor Plug Installation and App Setup 1. Insert your Wi-Fi Indoor Plug into the desired wall outlet location. Wi-Fi Indoor Plug Power Rating: Input: AC 100-120V, 50-60Hz AC Outlet: AC 100-120V, 50-60Hz, Maximum Output 10A Consumption: Typ. < 1W 2. Download the FS Home App from the App Store or Google Play. App Store is a service mark of Apple Inc. Google Play and the Google Play logo are trademarks of Google LLC.
3. Connect your smartphone or tablet to your local 2.4GHz Wi-Fi network. Your Smartphone Your Wi-Fi Router 4. Launch the FS Home App. 5. Sign up for an account or Login with your email or password. 6. Go to "Device" and press "+" in the upper right-hand of the screen and follow the on-screen pairing instructions. Make sure your phone is connected to a 2.
Important: Ensure that the network name or SSID is the desired network you want the devices to use. If it is different from your smartphone’s Wi-Fi settings, your device pairing will be unsuccessful. 7. Enter your Wi-Fi network password. 8. Scan the device QR-Code/UID with your smartphone or tablet or enter it manually.
9. Insert Indoor Plug into an available power outlet. Once it has beeped, press and hold the button on the front of the plug until it emits one long beep, then release the button. Button 10. Press "Pair" in the FS Home App within 10 seconds of releasing the button on the front of the Indoor Plug. Important: When pairing is successful, a new device will be added to your Device page. If unsuccessful, repeat Step 6.
Troubleshooting 1. Pairing Unsuccessful a. Make sure that your smartphone or tablet is connected to the desired Wi-Fi network. b. Make sure that the Wi-Fi network your smartphone or tablet is connected to is a 2.4GHz network, not a 5GHz network. This is only necessary when pairing. c. Make sure that the Wi-Fi signal is strong at the desired installation location. d. Unplug or power down other Wi-Fi devices to minimize wireless interference during setup. e.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
--Consult the dealer or an experienced radio/TV technician for help. CE marking on this product represents the product is in compliance with all directives that are applicable to it. Correct Disposal of this product This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
SG-IP100 V.02 10/2018 Fox & Summit USA, LLC | 562.758.8829 | www.foxandsummit.com © 2018 Fox & Summit USA LLC. All Rights Reserved.
