Installation Instructions

877-369-2562 | WWW.FOXBLOCKS.COM | 6110 Abbott Drive | Omaha, NE 68110
Fox Blocks ICF Guidebook V5MAR17
14
Fox Blocks Products & Accessories
HV CLIP PLACEMENT:
BOTTOM ROW:
Horizontally across every joint
CORNERS:
Horizontally across each joint
Vertically on first ties
TOP ROW:
Horizontally across every joint
Vertically on second tie from every joint
OPENINGS:
Vertically up wall on each side of openings
BUDGET:
One box for every 130 block ordered
One box = 250 Fox Block HV Clips
2
3
3
1
3 2
FOX BLOCKS
HV CLIP
Contractors asked for a wire clip to secure
their Fox Blocks jobs together so the team
at Fox Blocks went to work designing one.
Fox Blocks ties are engineered to be perfectly
balanced, spaced at 8" o/c Horizontally and
Vertically, giving flat walls post concrete. This
allowed us to put all of our design into one wire
clip which helps everyone with only one SKU.
Using the Fox Blocks HV clip eliminates
the need for truss wire completely on
your jobs. The result is that for about
1/2 the cost of the truss wire you will
get a stronger and straighter job.
The Fox Blocks HV Clip has been
engineered with eight bends allowing
one clip to work horizontally
or vertically.
FOX BLOCKS HV CLIP POSITIONS
Vertical Clips in Place Horizontal Clips in Place
Note: You can skew the HV Clip a notch or two for an even tighter t, if needed.
FOX BLOCKS HV CLIP BEING USED ON JOBS
Vertical & Horizontal Clips
in place close to corner
Showing HV Clips holding down a
top row that has been cut down to
+/- 8" in height
Product Label
1
1
2
1
3
8"