Installation & Assembly

Instructions for Applying Your Cactus Decals

NOTE!

If your walls are textured or you have used low-VOC paint, see following page first.

Adhesion issues will occur if instructions are not followed. Do not attempt to install your

decal before following these guidelines. Please contact us with any questions.

Step 1: ACCLIMATE DECALS

Allow your decals to acclimate to your environment. At least 48 hours prior to

installation, place your decal in the room that it's to be installed in. This allows the decals

to shrink or expand (acclimate) to the humidity and temperature in your home, before

being placed on your wall.

Step 2: CLEAN WALL

Use a warm damp cloth to wipe down the surface and let it dry at least 24 hours before

installation. DO NOT use

soap or cleaning agents. They can make your decal stick poorly.

If you have recently painted, allow paint to cure for 96+ hours before installing decal.

Step 3: CUT DECAL COMPONENTS INTO 6 SECTIONS

See Figure 1.1. Dashed lines indicate cut paths.

FIGURE 1.1

PAGE 1
Instructions for Applying Your Cactus Decals NOTE! If your walls are textured or you have used low-VOC paint, see following page first. Adhesion issues will occur if instructions are not followed. Do not attempt to install your decal before following these guidelines. Please contact us with any questions. Step 1: ACCLIMATE DECALS Allow your decals to acclimate to your environment. At least 48 hours prior to installation, place your decal in the room that it's to be installed in.
PAGE 2
Instructions for Applying Your Cactus Decals (cont'd) Step 4: GET HELP Given the size of our decals, it’s best to install with two people. Step 5: INSTALL FIRST CACTUS IN THE MIDDLE OF YOUR WALL Once you've identified where you want the first decal to be located, and have verified that it's level and centered tape it to the wall using masking tape. DO NOT REMOVE BACKING PAPER YET. Twist tape into bow-tie shape, so that the adhesive sides are opposite of each other.