Use and Care Manual

PRODUCT DESCRIPTION
BENEFITS/FEATURES
SUGGESTED APPLICATIONS
TECHNICAL INFORMATION
COVERAGE
SHELF LIFE
PACKAGING
The Armor UTN60 is a commercial grade, solvent-based, high gloss aliphatic urethane coating is designed to enhance and pro-
tect a variety of interior surfaces from deterioration, oil and gas stains, harsh liquids and chemicals. It is manufactured in the
U.S., and made from high quality resins and solvents. The Armor UTN60 will provide a long-lasting, UV-stable high gloss fin-
ish that won’t peel, chip, or flake. It is available in clear, as well as several color options. Non-slip additives and matte packs are
available.
Abrasion Resistance………………...……………...35 mg loss
(Tabler Index, ASTM 4060-81, CS-17 Abrasion Wheel, 1000 gram load)
Gloss 60…….............................................................90-95
Flexibility (1/8” Mandrel).........................................Pass
Hardness - Shore D....................................................62
Water Resistance.......................................................Excellent
Solids % Weight (Federal Spec. TTP-141B).............60%
Density lbs/Ga. (Federal Spec. TTP-141B)...............8.49
VOC ………………………………………………..< 250 g/l
When properly sealed and stored, the shelf life of the UTN60 is up to 1 year.
The Armor UTN60 is available in 3 Gallon Kits and 15 Gallon Kits.
First Coat 750-900 ft
2
/3 gallon kit
Second Coat 800-1000 ft
2
/3 gallon kit
Coverage rates will vary depending upon surface porosity and texture, and application method. Excessive build up should be avoided.
Mix Ratio (a/b volume)....................................2 to 1
Coverage (3-5 mils dft.)................. .................250-340 sq. ft./ga
Viscosity..........................................................400-600 cps
Pot Life.............................................................25-30 minutes
Dry Time-Set to Touch……………….............8-10 hours
Dry Time-Recoat…..........................................10 - 14 hours
Dry Time-Foot Traffic.......................................24 - 36 hours
Dry Time-Wheel Traffic....................................3 - 5days
Application temperature…...………….…….....45-85 degrees F
Armor UTN60 High Gloss Industrial Coating
Foundation Armor
472 Amherst Street #14
Nashua, NH 03063
[phone]
FoundationArmor.com
 Provides a long-lasting, UV stable high gloss finish.
 Reduces deterioration caused by surface abrasion.
 Offers excellent long term wear resistance.
 Reduces the formation of efflorescence.
 Stops concrete surface stains.
 Resists oil, gas, harsh liquids, and chemicals
 Easy to apply and maintain.
 Can provide up to 10 years of life before the need for a recoat.
 Stops concrete dusting.
 Interior concrete floors that have been diamond-ground to a
40-80 grit finish
 Garage and shop floors, aircraft hangar floors
 Warehouse and manufacturing plant floors
 Kennel floors
 Retail and showroom floors
CHEMICAL RESISTANCE
NO EFFECT: Urine, Blood, Brake Fluid, Xylene, Gasoline, Oil, Skydrol B-4, Ethylene Glycol, MEK, 10% and 50% Sodium Hydroxide,
25% Sulfuric Acid, 25% Acetic Acid, 20% Nitric Acid, 10% Hydrochloric Acid.
PLEASE NOTE: A chemical exposure test should always be performed prior to application to ensure satisfactory resistance.