Installation Guide

PRODUCT DESCRIPTION
BENEFITS/FEATURES
RECOMMENDED APPLICATIONS
TECHNICAL INFORMATION
SPECIFICATIONS/COMPLIANCES
APPROXIMATE COVERAGE RATES
SHELF LIFE
PACKAGING
ARMOR SX5000 WB
Penetrating Clear Water-Based Silane-Siloxane Concrete & Masonry Sealer, Water Repellent, Salt Guard
ARMOR SX5000 WB
WATER REPELLENTS
Armor SX5000 WB is a water-based Silane-Siloxane water repellent and impregnating agent for porous masonry surfaces such as
concrete, block, brick, and unglazed tile. Armor SX5000 WB will penetrate and chemically bond deep within the substrate to provide
long lasting protection against deterioration or staining due to water conditions. Armor SX5000 WB will not impair the natural breath-
ing characteristics of treated substrates, nor will it produce a film. Armor SX5000 WB will help concrete and masonry surfaces to
resist common issues such as cracking, efflorescence, spalling, staining, and other damages caused by intrusion of water.
♦ Deeply penetrating porous surfaces, it provides superior water repellancy, while allowing surface to breathe.
♦ Provides excellent resistance to mold, mildew, and fungus.
♦ Containing low VOC’s and being solvent free allow for safe application in occupied buildings.
♦ Superior efflorecence and strong alkali resistance. Won’t peel, chip, flake or fade (not a coating).
Armor SX5000 WB is recommended for interior and exterior, horizontal or vertical, porous masonry and concrete surfaces where a
deep penetrating, water based water repellent is specified.
Solids…………………………………………...…10% (active)
Drying Time………………………………………....1 - 2 hours
Re-Coat Time…………...………………...refer to instructions
Foot Traffic...........................................................8-12 hours
Wheel Traffic......................................................24-48 hours
Application Temp................................................50°F - 85°F
***Please note that low air and/or concrete temperatures and/or relative humidity may extend drying times. Follow recommended coverage rates for best results.
¨ DRIED COATING IS USDA ACCEPTED
Armor SX5000 WB has a shelf life of up to one year in it’s original, sealed, unopened container.
Armor SX5000 WB is packaged in 1 gallon bottles, 5 gallon pails, and 55 gallon drums.
Concrete Surfaces (Pre-cast, pavers, cast-in place, brick, tile) 150-300 ft
2
Fired Clay Surfaces (Brick, tile, terra cotta, pavers) 100-250 ft
2
*Coverage rates vary depending upon surface porosity and texture, and application method. Excessive build up should be avoided.
Wet Appearance.......................................................Milky White
Dry Appearance.............................................Clear and Invisible
VOC Content.....................................................................<0 g/l
Blush Resistance...............................................................Good
Alkalinity Resistance.....................................................Excellent
Concrete Adhesion.......................................................Excellent
A Foundation Armor Product
FOUNDATION ARMOR
3 BUD WAY STE 27 NASHUA NH 03063
Phone: [phone]
Visit us online at: www.FoundationArmor.com