Use and Care Manual

PRODUCT DESCRIPTION
BENEFITS/FEATURES
SUGGESTED APPLICATIONS
TECHNICAL INFORMATION
COVERAGE
SHELF LIFE
PACKAGING
The Armor WB25 is a water-based high gloss acrylic sealer that is designed to seal, enhance, cure, and protect a variety of interi-
or and exterior surfaces. It is manufactured in the U.S., and made with high quality resins. The Armor WB25 will enhance dull
or faded surfaces, and provide a long-lasting, water repellent, non-yellowing high gloss finish that won’t peel.
Solids………………………………………………25%
Drying Time……………………………………….1-2 hours
Re-Coat Time…………...…………………………4 - 6 hours
Foot Traffic..............................................................24 hours
Wheel Traffic...........................................................24 - 48 hours
Application Temp....................................................45°F - 85°F
When properly sealed and stored, the shelf life of the Armor WB25 is up to 1 year.
The Armor WB25 is available in a 16 OZ Sample, 1 Gallon Bottle, 5 Gallon Pail, and 55 Gallon Drum.
Old or Porous Surfaces 200-250 ft
2
/gallon in one coat
Dense or Trowel Finished Surfaces 250-325 ft
2
/gallon in one coat
The average coverage rate is 250 FT2/gallon in one coat. Coverage rates will vary depending upon surface porosity and texture, and applica-
tion method. Excessive build up should be avoided.
Wet Appearance.......................................Milky White
Dry Appearance........................................High Gloss
VOC Content............................................Low VOC
Blush Resistance.......................................Good
Solvent Resistance………………………Superior
Concrete Adhesion....................................Excellent
Armor WB25 Water Based High Gloss Acrylic Sealer
Foundation Armor
472 Amherst Street #14
Nashua, NH 03063
[phone]
FoundationArmor.com
 Provides a long-lasting, non-yellowing high gloss finish.
 Reduces deterioration caused by surface abrasion.
 Reduces the formation of mold, mildew, and algea.
 Reduces the formation of efflorescence.
 Reduces surface stains.
 Resists oil.
 Also approved as a cure and seal.
 Easy to apply and maintain.
 Can provide up to 2-5 years of life before the need for a recoat.
 Poured, broom finished, and stamped concrete.
 Concrete bricks and pavers.
 Exposed aggregate and some natural stone.
 Do not use on red clay brick without first applying a test area.
 Driveways, walkways, and stairs.
 Pool decks and patios.
 Garage, warehouse, and basement floors.
 Car ports, pole barns, retail and restaurant floors.
COMPLIANCES
 ASTM C 1315, Type 1, Class A
 ASTM C 309, Type 1, Class A & B
 AASHTO Specification M-148, Type 1, Class A & B
 Dried Coating is USDA Accepted