User Manual

-71-
Model UR-2 <MENU mode / SYSTEM SETUP menu>
The SYSTEM SETUP menu consists of 18 menu items. You can make settings for operation environment
of the UR-2. The table below shows the setting options for each menu item as well as the default setting.
Menu item
Default file name
Select input
Record FS/bit
Record CH.
Record mode
Max. file length
Peak hold ttme
REF. level
Cue monitor out
Digital out
Setting options
Display INV.
Keyboard type
SYS. user save
SYS. user load
Default setting
File name mode
Scene name
Take number
Date, Take, Reel
Up to 18 characters can be entered.
001 ~ 999
Version
Adjust RTC.
SYS. initial memory
SYS. default set
Ta ke
Analog, Digital
SCENE
001
Analog
44K/16
Stereo
Normal
4G
3sec.
-20dBFS
ALL
AES/EBU
Off
US
-
-
-
Factory
shipped setting
Factory
shipped setting
Factory
shipped setting
44K/16, 48K/16, 44K/24, 48K/24, 88K/24, 96K/24
Stereo, Mono
Normal only
2G, 4G
0 ~ 9sec
-12dBFS, -20dBFS
ALL, HP
AES/EBU, SP DIF
Off, On
US, APAN
Saves the settings of the SYSTEM SETUP and PLAY SETUP menu to the
user system memory.
Loads the user system memory.
Initializes the system memory for the SYSTEM SETUP and PLAY SETUP
menu.
Initializes the system memory as well as deletes the flash memory informa-
tion.
**Y **M **D **h **m **s
Displays the current system version.
<Note>: For details about the "Display INV." and "Adjust RTC" menu items, see page 24 and 23
respectively. This section describes details about the other menu items.
SYSTEM SETUP menu details
<Note>: The "Record Mode" menu item is fixed to "Normal" in this software version.