User Manual

-70-
Model UR-2 <MENU mode / SYSTEM SETUP menu>
MENU mode
In the MENU mode, there are various setting and execution menu items.
By pressing the [ENTER] key while the unit is stopped the unit enters the MENU mode and the display
shows the main menu screen.
There are ten menus. You can enter the desired menu by using the [MENU] dial to highlight the menu
and pressing the [ENTER] key.
This section describes details about the "SYSTEM SETUP" and "STORAGE UTILITY" menu in the main
menus. For details about the other menus, see the pages shown in the table below.
PHONES
MAX
MIN
MAX
MIN
MAX
MIN
MIC GAIN MIC ININPUT LEVEL
ABS 0
REC END
POWER
USB
(KYBD ONLY)
READY
EJECT
AUTO PLAY
SHIFT
MODE
PLAY
TIME REC RDY EXIT
EDIT REPEAT
MIC IN
PHANTOM
MIC SET
FILE SEL DISPLAY
FILE/CURSOR
MENU / ENTER
REC
STOP
PLAY
REW
F FWD
MRGN RST
STRG SEL
SD-2
USBPC
HOST
SD-1
CUEPREV NEXT
CUE/LOCATE
TIME EDIT
UR-2
STEREO RACK MEMORY RECORDER
[ENTER] key / [MENU] dial
Main menu
SYSTEM SETUP
PLAY SETUP
STORAGE UTILITY
FILE SEL
STORAGE SEL
MIC IN SETUP
CHAIN PLAY SET
TIMER PLAY SET
REMOTE SET
USB to PC
You can make settings for operation environment of the UR-2 (see the next pages).
You can make settings for playback. The "Play Mode" and "Repeat" items can be set using the
[PLAY MODE] and [REPEAT] keys on the front panel (see pages 41 and 54).
You can make settings for managing storage devices (SD card/USB memory) and recorded
audio files (see page 82).
You can select a file to be played back on the file selection screen. You can also bring up the file
selection screen using the [FILE SEL] key on the front panel (see page 42).
You can select the current storage device for recording/playback on the storage selection
screen. You can also bring up the storage selection screen by pressing the [
SHIFT
] key fol-
lowed by the [FILE SEL] key (see page 28).
Consists of five menu items for settings required for using a microphone via the [MIC IN]
connector. You can also bring up the storage selection screen by pressing the [
SHIFT
] key
followed by the [MIC IN] key (see page 39).
Creates or edits the chain play list for chain play and memory play (see page 46).
Creates or edits the timer play list for timer play (see page 51).
Consists of menu items for settings required for controlling the unit from an external device
(see page 61).
Used for enabling or disabling USB connection between the unit and a computer for data
transfer (see page 65).
Contents
About MENU mode