User Manual

E-5
Adjusting volume level
In the LEVEL mode, you can adjust the volume
level using the [CONTROL] knob.
The VOLUME and TRIM items are available in the
LEVEL mode. The VOLUME item coarsely adjusts
the level, while the TRIM item ne-tune the level.
By using a combination of these items, you can
adjust the volume level precisely in 440 steps.
1) Set the mode select switch to the LEVEL posi-
tion.
LEVEL
The upper status indicator (beside VOLUME)
lights steadily.
In this condition, you can coarsely adjust the vol-
ume level.
2) Adjust the volume level coarsely by rotating the
[CONTROL] knob.
<Memo>: If you change the stored value by rotating
the [CONTROL] knob, the status indicator changes
from lighting to ashing .
If necessary, ne-tune the volume level by follow-
ing steps 3) and 4) below.
3) Press the [CONTROL] knob.
The lower status indicator (beside TRIM) lights
steadily or ashes.
In this condition, you can fine-tune the volume
level.
4) Fine-tune the volume level by rotating the
[CONTROL] knob.
<Memo>: TRIM reset function
When you change the stored VOLUME value in step
2) above, the TRIM value is automatically reset to the
center position. This function allows you to make pre-
cise volume level adjustment effectively.
5) After ne-tuning the volume level, long-press
the [CONTROL] knob to save the adjusted val-
ue.
The upper status indicator lights steadily.
<Memo>: Even if you perform step 5) above to save
the value after you ne-tune the level (i.e. when the
lower status indicator ashes), the upper status indi-
cator lights steadily. Therefore, whenever you attempt
to readjust LEVEL after you saved the LEVEL value,
you can start with the VOLUME adjustment (coarse
adjustment).
<Memo>: By long-pressing the [CONTROL] knob,
values of all items (both the volume and tone controls)
are saved.
Volume level and tone controls
VOLUME
TRIM
LEVEL
You can adjust volume level as well as tone using
the [CONTROL] knob.