Installation Guide

19
AL
13
HOME TRADITIONAL PANEL INSTALLATION
PROUD POST: ROUND ACCENT TOP RAIL (ATR)
Step 1: Round ATR Spacers
1. Attach Spacers using provided self-drilling screws with a
5/16” [8mm] nut driver, two screws per spacer. As shown in
Fig. 2.
• The Accent Top Rail Kit comes with 7 spacers in the 93.89”
[2385mm] kit, 6 spacers in the 69.89” [1775mm] kit and 14
spacers in the 190” [4826mm] kit.
• The spacers should be equally spaced along the length of the
rail, with no more then 14” [279.5mm] spacing between them.
As shown in Fig. 1.
• The end spacers should be placed as close to the end brackets
as possible.
Note:
• DO NOT REMOVE BACKING OF DOUBLE SIDED TAPE
UNTIL YOU ARE READY TO PERMANENTLY ATTACH
THE ATR.
Fig. 1
Spacer Attached
Next To Bracket
14” [279.5mm]
Max
Double Sided Tape
Fig. 2