User Manual

ManualsBrandsForsafe ManualsCamera SystemForsafe YW-0629 Digital Wireless Camera System

Table Of Contents

USER

MANUAL

Digital Wireless Camera System

SPLIT VIEW FOR ( 2) CAMERA

Congratulations on

purchasing our Backup Camera System!

Normally you do not need to pair the camera and monitor, we defaulted and paired them well

to the first channel before delivery. What you need to do are as follow:

1. Find out the installation place of the camera and the power of reversing light( or ACC).

2. Install the monitor to a suitable place and connect it to the cigarette lighter.



components are working properly.

IN NO EVENT SHALL SELLER OR MANUFACTURER BE LIABLE FOR ANY DIRECT

OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES

RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.

Summary of content (5 pages)

PAGE 1
Congratulations on purchasing our Backup Camera System! IN NO EVENT SHALL SELLER OR MANUFACTURER BE LIABLE FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT. We recommend doing a benchmark test before installa�on to ensure that all components are working properly.
PAGE 2
Package contents Wireless camera x 1 5" wireless monitor x 1 Mount Bracket x 1 Antenna x 2 Screw Kit for Camera Installa�on x 1 Camera Power Cable x 1 Installation Electric shock or product malfunc�on may occur if this product is installed incorrectly. Use this product within the voltage range speciﬁed. Failure to do so can cause electronic shock or product malfunc�on. Take special care when cleaning the monitor, no wet hands touch during installa�on. Make sure to ﬁrmly aﬃx the product before use.
PAGE 3
Picture-Image Se�ngs Technical Specification Monitor CH1 BRIGHTNESS 6 6 PAIRING PICTURE MIR-FLIP SYSTEM CONTRAST 6 HUE The image can be modiﬁed to the driver's speciﬁca�ons. Easily adjust the Brightness, Contrast, and Color to create the op�mal brightness.
PAGE 4
Wiring The System Monitor Operation 1 Connect to cigare�e lighter socket in the car DC 10V-32V 1 2 2 3 4 5 4 3 5 UP Arrow Menu / Selection button Down arrow Parking Line on/off and Adjust Parking Line Position Confirm / CH Selection Main Menu Pairing (RED) ACC DC 12V-32V System has been paired, connect power and it works. Use pairing unless you need to add more cameras or replace a camera. (BLACK) Ground CAMERA CONNECTION: Locate the clearance lights wiring on your vehicle.
PAGE 5
FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.