Safety Data Sheet

ManualsBrandsForney ManualsArc Welding EquipmentCutting Fluid Industrial Pro EEZ Spray Foam, 17-Ounce

Table Of Contents

SAFETY DATA SHEET

*****

SECTION 1 – IDENTIFICATION *****

PHONE NUMBER

1-800-521-6038

EMERGENCY CONTACT

Domestic: 1-800-535-5053

International: 1-352-323-3500

E-Z Foam Cutting Fluid

Lubricant

E-Mail

customerservice@forneyind.com

MANUFACTURER NAME

Forney Industries, Inc.

2057Vermont Dr.

Fort

Collins, CO 80525

PRODUCT NAME

RECOMMENDED USE

RESTRICTIONS ON USE

It is against federal law to use this product inconsistently with its labeling.

***** SECTION 2 – HAZARD(S) IDENTIFICATION *****

OSHA Defined Hazards Not classified

GHS HAZARD CLASS

Physical Hazards Flammable Aerosols – Category 1

Health Hazards Aspiration Hazard – Category 1

Repr. Toxicity – Effects on or via lactation

Environmental Hazards Hazardous to the aquatic environment, acute and

long term hazard – Category 1

GHS Symbol/Pictogram

Signal Word Danger

Hazard Statements Extremely flammable aerosol

May be fatal if swallowed and enters airways

May cause harm to breast-fed children

Very toxic to aquatic life with long lasting effects

20856

3051

Summary of content (9 pages)

PAGE 1
SAFETY DATA SHEET 20856 ***** SECTION 1 – IDENTIFICATION ***** MANUFACTURER NAME Forney Industries, Inc. 2057Vermont Dr. Fort Collins, CO 80525 PHONE NUMBER 1-800-521-6038 PRODUCT NAME E-Z Foam Cutting Fluid RECOMMENDED USE Lubricant EMERGENCY CONTACT Domestic: 1-800-535-5053 International: 1-352-323-3500 E-Mail RESTRICTIONS ON USE customerservice@forneyind.com It is against federal law to use this product inconsistently with its labeling.
PAGE 2
PRODUCT NAME Forney Industries E-Z Foam Cutting Fluid ***** SECTION 2 – HAZARD(S) IDENTIFICATION (Continued) ***** Precautionary Statements Prevention Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. Do not eat, drink or smoke when using this product Ground/bond container and receiving equipment.
PAGE 3
PRODUCT NAME Forney Industries E-Z Foam Cutting Fluid ***** SECTION 4 – FIRST AID MEASURES ***** Description Of Necessary First Aid Measures Eye Contact Immediately flush eyes with plenty of water, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Continue to rinse for at least 15 minutes. Get medical attention. Skin Contact Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Continue to rinse for at least 10 minutes.
PAGE 4
PRODUCT NAME Forney Industries E-Z Foam Cutting Fluid ***** SECTION 6 – ACCIDENTAL RELEASE MEASURES ***** Personal Precautions, Protective Equipment And Emergency Procedures For Non-Emergency Personnel Take no action involving personal risk without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Put on appropriate personal protective equipment. Floors may be slippery, use care to avoid falling.
PAGE 5
Forney Industries E-Z Foam Cutting Fluid PRODUCT NAME ***** SECTION 7 – HANDLING & STORAGE (Continued) ***** Conditions For Safe Storage Store in accordance with local regulations. Store in original container protected from direct sunlight in a dry, cool and well ventilated area, away from incompatible materials (see Section X) and food and drink. Keep away from heat, sparks and open flame. Keep container tightly closed and sealed until ready for use.
PAGE 6
Forney Industries E-Z Foam Cutting Fluid PRODUCT NAME ***** SECTION 9 – PHYSICAL & CHEMICAL PROPERTIES ***** Appearance Physical State Color Aerosol Amber Odor Odor Threshold Mild solvent Not available Ph Melting Point Freezing Point (Pour Point) None Not Available -72 F Initial Boiling Point Boiling Range 369 F Not Available Drop Point Flash Point Not applicable 156 F Evaporation Rate <1 (butyl acetate = 1) Flammability Limits Upper Lower 7.3% 0.
PAGE 7
Forney Industries E-Z Foam Cutting Fluid PRODUCT NAME ***** SECTION 10 – STABILITY & REACTIVITY Reactivity Not expected to be Explosive, Self-Reactive, Self-Heating, or an Organic Peroxide under US GHS definitions Chemical Stability This product is stable under normal conditions. Possibility Of Hazardous Reactions Under normal conditions of storage and use, hazardous reactions will not occur. Conditions To Avoid Avoid all possible sources of ignition (spark or flame).
PAGE 8
Forney Industries E-Z Foam Cutting Fluid PRODUCT NAME ***** SECTION 11 – TOXICOLOGICAL INFORMATION ***** Sensitization Respiratory Skin Sensitization No additional information Not a skin sensitizer Germ Cell Mutagenicity In vivo and in vitro studies on mineral spirits containing up to 22% aromatics indicate these products are not genotoxic Carcinogenicity Meets EU requirement of less than 3% (w/w) DMSO extract for total polycyclic aromatic compound (PAC) using IP 346.
PAGE 9
Forney Industries E-Z Foam Cutting Fluid PRODUCT NAME ***** SECTION 14 – TRANSPORT INFORMATION ***** DOT UN# UN1950 UN SHIPPING NAME Aerosols, flammable, (each not exceeding 1 L capacity) Transport Hazard class Class Label Packing Group Not Applicable 2.1 2.1 ***** SECTION 15 – REGULATORY INFORMATION ***** TSCA Section 12(b) Export notification (40 CFR 707 Subpart D): None CERCLA Hazardous Substance List (40 CFR 302.4): Not listed US OSHA Specifically Regulated Substances (29 CFR 1910.