User's Manual

RC240 3D Mouse Presenter V1.3
8
the LASER key is flashing. The RIGHT and LEFT key is Mouse
Right and Left button respectively.
Click LASER key once again to disable the 3D Mouse. The blue
light on the LASER key is turned off. The RIGHT and LEFT keys
are NOT Mouse Right and Left now.
When 3D Mouse is not moving for 30 seconds, the Presenter turns off
the 3D Mouse automatically to save the battery
power.
Open/Close Slide Show
Clicking POWER key once will open PowerPoint
file to Slide Show or close the Slide Show.
Page Up/Down and Scrolling
Clicking the UP key will initiate a page up operation
while clicking DOWN will initiate a page down.
Press and hold UP or DOWN key, it will execute the scrolling up or
scrolling down feature respectively.
Group Vibrating
If the meeting host wants to
pass some predefined
message (e.g., time end) to
the orator, he may use
another set of Presenter to
send signal to the orator.
The host just presses and
holds the
FEATURE key
for more than 2 seconds
until it starts to vibrate, the
Presenter on the orator’s hand will also vibrate for 5 seconds. (Note:
the 2
nd
Presenter should be linked with Receiver in advance. Refer to
P13 for the linking information.)
Change 3D Mouse Speed
Right click the aimMaster
TM
Pro icon on the
System Tray. Select the Mouse Speed tab.
Then choose one of the 3 speeds.