Instructions / Assembly
Before You Start
PARTS
1x spike aerator
1x protective shield
1x lower handle section
1x middle handle section
1x upper handle sec tion
2x 6x20mm bolt
2x washer
2x lock nut
ASSEMBLY
Please
read
all
instructions
carefully.
Retain instructions for future reference.
Seperate and count all parts and hardware.
1.
Fit
the
protective
shield
over
the
bar
on
the
top of the spike aerator ensuring the clips
on the protective s hield hold it in place.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be p laced in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
2.
Position
the
lower
handle
section
over
the
protective shield lining up the two sets of
holes. Fix together using bolts, washers
and nuts provided.
Keep
all
small
parts
and
packaging
materials
for
this
product
away
fr om
babies and children as they potentially pose a serious choking hazard.
3. Attach the middle handle section and upper
handle section ensuring that the buttons pop
out and secure into place.
1 2