Spec Sheet

ManualsBrandsFollett ManualsCommercial Equipment23" Horizon Elite Series RIDE Ice Machine with 759 lbs. Daily Ice Production, Chewblet Ice, RIDE Technology and Energy Star Certified in Stainless Steel

Horizon Elite

™

self-contained 710 series Chewblet

ice machine

Model configurations

For use with

Install/mount Condenser V/Hz/Ph Item number

ice storage bin

top mount air 115/60/1 HCD710ABT

RIDE air 115/60/1 HCD710ABS

Follett Vision

™

undercounter

ice & beverage

dispenser

RIDE air 115/60/1 HCD710AVS

Cornelius PR150

undercounter

ice & beverage

dispenser

RIDE air 115/60/1 HCD710APS

countertop

ice & beverage

dispenser

(by others)

top mount

air 115/60/1 HCD710AHT

RIDE air 115/60/1 HCD710AHS

drop-in dispenser

(by others)

RIDE air 115/60/1 HCD710AJS

Ordered separately

Not compatible with Micro Chewblet ice

Requires top kit (see page 4)

For Micro Chewblet ice, replace second character (C) with an M

e.g. HMD710ABT

801 Church Lane | Easton, PA 18040, USA

1.800.523.9361 | 1.610.252.7301 | follettice.com

Features

Horizon Elite

710 series - up to 759 lb (345 kg) in 24 hours

- automatically transport ice through a tube with RIDE

technology from up to 75’ (22.8 m) away

- chewable, compressed nugget ice is preferred

over cubes

- Chewblet ice dispenses reliably from ice and

beveragedispensers

- available with approximately 1.00" (2.54 cm) long

standard Chewblet ice or optional 3/8" (0.95 cm) long

Micro Chewblet

™

ice

- quiet production without noisy harvest cycles

Revolutionary, scale inhibiting design

- produces ice that has 15% the TDS of the incoming water

for optimum dispensing and long life in drinks

- quarantines and regularly expels scale producing dissolved

solids to dramatically reduce scalebuildup

- increases time between descaling and reduces or

eliminates the need for expensive scale treatment

- saves 35% water compared to comparable cubers

- meets 2018 Department of Energy regulations

- all models ENERGY STAR

certiﬁed

Durable, attractive ice machine

- regular bearing inspection or replacement is notrequired

- upgraded, easy-to-read LED operating status and

diagnosticdisplay

Designed with sanitation in mind

- Agion

silver-based antimicrobial product protection of key

ice and water contact components

- ﬂoatless, sealed design inhibits formation of bioﬁlms

- semi-automatic cleaning and sanitizing system

Warranty

- 3 years parts and labor, 5 years compressor parts

Certiﬁcations

Independent third party studies. Contact Follett for details.

Disclaimer: Antimicrobial protection is limited to the treated components and does not treat water or ice.

Job

Item

Short form speciﬁcation:

Ice machine to be a Follett

Horizon Elite ice machine model

______________ [Insert size/series,condenser type and installation/

mounting, from model number guide] capable of producing compressed

nugget ice using an ecient, sanitary horizontal evaporator/auger

system and delivering ice by a ﬂexible wire reinforced transport tube to

ice storage bin, iceand water dispenser, ice and beverage

dispenser or

drop-in dispenser and provided with a stainless steel

frame and exterior, slide-out compressor/condenser with utility docking

station, front-mounted unit status display, automatic self-ﬂush, and

semi-automatic cleaning and sanitizing system, plusall the featureslisted

below and mounting/performance-enhancing accessories checked.

Summary of content (8 pages)

PAGE 1
Horizon Elite™ self-contained 710 series Chewblet® ice machine Short form specification: Features Horizon Elite 710 series - up to 759 lb (345 kg) in 24 hours - automatically transport ice through a tube with RIDE® technology from up to 75’ (22.8 m) away - chewable, compressed nugget ice is preferred over cubes1 - Chewblet ice dispenses reliably from ice and beverage dispensers - available with approximately 1.00" (2.54 cm) long standard Chewblet ice or optional 3/8" (0.
PAGE 2
Accessories Dimensional drawing Top kit for ice and beverage dispensers (page 4) Water filters (refer to form# 9905) Wall mount bracket (item# 00997098) Ice machine stand, height-adjustable (item# 00997080) Timer to control one or two ice machines (item# 00967625) Longer ice transport tube, specify length: ___ ft/m in 5’/1.
PAGE 3
1 – Locating the ice machine Horizon Elite self-contained Chewblet ice machines allow top-mounting or mounting in a base cabinet, on a wall or on a floor stand up to 75' (22.8 m) from the dispenser or ice bin with RIDE technology. In-cabinet mounting (RIDE applications) require special attention to service access, unit ventilation and ice tube runs (see pages 4-8).
PAGE 4
1 – Locating the ice machine (continued) Top mounting – compatible ice and beverage dispensers1 Manufacturer Coca-Cola dispensers Cornelius dispensers Lancer dispensers Pepsi dispensers Servend dispensers Model Number Width in (cm) Depth 2 in (cm) Height 3 in (cm) Top kit Freestyle 7000 30.10 (76.5) 33.11 (79.0) 47.00 (119.4) H22F30-F 4, 5 Freestyle 9000 25.50 (64.8) 35.50 (90.2) 73.75 (187.3) H22F24-F4, 6 Freestyle 9100 25.50 (64.8) 39.25 (99.7) 77.25 (196.
PAGE 5
3 – Undercounter/in-cabinet mounting and ventilation Using Follett supplied grilles Horizon Elite ice machines can be installed undercounter/in-cabinet to fill bins or dispensers using RIDE technology. Care must be taken to ensure proper cabinet venting to avoid recirculation of hot air. Improper venting can cause ice machine outages. supplied grilles 18.00" (45.7 cm) min. Horizon Elite ice machine Ice transport tube minimum 1/4" per foot (2 cm per meter) pitch toward ice machine 24.50" (62.2 cm) min.
PAGE 6
3 – Undercounter/in-cabinet mounting and ventilation (continued) Using grilles by others/alternate cabinet ventilation Cabinets with ventilation or louvers other than those provided require special consideration to provide proper ventilation. Recirculation of hot air will reduce ice machine performance and can cause ice machine outages. 18.00" (45.7 cm) minimum grilles by others/ alternate cabinet ventilation 18.00" (45.7 cm) minimum exhaust air in all counter ventilation within 18.00" (45.
PAGE 7
4 – Horizon Elite ice machine mounting accessories Optional wall mount bracket Optional machine stand Important specifier notes 6.88" (17.48 cm) 1. For secure wall mounting, specify optional wall mount bracket. 2. Wall and fasteners must support the weight of the ice machine, bracket, supply water and ice. Use of a backing board may be required with hollow wall construction. 3. Machine stand mounting adds 6.88" (17.48 cm) to height of ice machine. 4. No dips in tube routing allowed. 5.
PAGE 8
6 – Horizon Elite ice tube runs - specifier guidelines Long tube runs for RIDE remote ice delivery equipment Important specifier notes support straps beverage dispenser maximum 2' (60.9 cm) minimum of 6.00" (15.24 cm) turn/corner radius transport tube slope ice transport tube – (toward ice machine) 1 3/16" OD, 2 1/8" OD with insulation 1/4" 1' wall-mounted ice machine 1. 75' (22.8 m) maximum ice transport tube run. 2. Tubing routing bends must have a 6.00" (15.24 cm) radius or larger. 3.