Manual
© 2009 Model 9C1 is a registered trademark of FMK Firearms, Inc. All rights reserved. Made in USA
17
1. Insert a 1/16”
punch into the small
hole in the slide end
cap and depress
slightly. This will
allow the end cap to
be removed.
6. The barrel can
now be removed
from the slide.
5. Holding the slide
assembly upside
down push the recoil
spring slightly forward
and lift for removal.
2. Slide the slide
end cap down-
ward. The striker
assembly can now
be removed.
No further disassembly of the pistol is required for normal cleaning or maintenance. If further disassembly is required it should
be performed by a certied gunsmith.
To remove the striker assembly: