Datasheet

AC-only clamps
Fluke current clamps provide accurate current measurements
without breaking electric circuits.
i800 AC Current Clamp
This ac current clamp is designed
to extend the current measuring
capability of a digital multimeter
to 800 A ac. It is compatible with
a digital multimeter that accepts
shrouded 4mm (0.16 in) banana
plugs and has an ac milliamp
range.
• Current range: 100 mA to
800 A rms ac
• Frequency range: 30 Hz to
10 kHz (-3 dB)
• Safety rating: CAT III
600 V rms
i400 AC Current Clamp
This high-safety current clamp
for digital multimeters is a
single range 400 A ac clamp
that is designed to offer max-
imum utility in a very compact
shape. It is compatible with
most digital multimeters or
any other current measure-
ment device that accepts 4 mm
(0.16in) shrouded banana plugs
and has an ac milliamp range.
The division ratio is 1000:1.
• Current range: 1 A to 400 A ac
• Frequency range: 5 kHz to
20 kHz (-3 dB)
• Safety rating: CAT IV 600 V,
CAT III 1000 V
i400s AC Current Clamp
This high-safety compact current
clamp with BNC output is a com-
panion to a ScopeMeter or power
quality meter to measure up to
400 A ac.
• Current range: 0.5 A to
400 A ac
• Frequency range: 5 Hz to
10 kHz (-3 dB)
• Optional PM9081/001 Dual
Banana Plug Male to Female
BNC Adapter is available for
digital multimeters
• Safety rating: CAT IV 600 V,
CAT III 1000 V
i200 AC Current Clamp
This small-sized single-range
current clamp features safety-
shrouded 4 mm (0.16 in) banana
plugs. It is compatible with most
digital multimeters or other cur-
rent measurement device that
accepts shrouded 4mm (0.16in)
banana plugs and has an ac mil-
liamp range.
• Current range: 1 A to 200 A ac
• Frequency range: 40 Hz to
40 kHz
• Safety rating: CAT III 600 V
i200s AC Current Clamp
This small-sized dual-range cur-
rent clamp offers voltage output
using a safety-insulated BNC
connector. A dual banana-to-BNC
adapter allows the clamp to be
connected to meters with banana
inputs. It is an ideal companion
to a ScopeMeter, power quality
meter, or digital multimeter.
• Current ranges: 0.1 A and
200 A ac switchable
• Frequency range: 40 Hz to
10 kHz
• Safety rating: CAT III 600 V
i2000 Flex AC
Current Clamp
This current probe utilizes the
Rogowski (air-cored coil) prin-
ciple. It can be used to measure
currents up to 2000 A when used
in conjunction with multimeters,
recorders, or data loggers. The
flexible and lightweight mea-
suring head allows quick and
easy installation on thick and
hard-to-reach areas.
• Current range: 20 A, 200 A,
and 2000 A ac switchable
• Frequency range: 10 Hz to
20 kHz
• Safety rating: CAT III 600 V
i1000s AC Current Clamp
This large ac current clamp
expands applications in industrial
and power environments by con-
necting directly to an oscilloscope
using a reinforced coaxial cable
and an insulated BNC connector.
It is ideal for measuring distorted
current waveform rms and har-
monics.
• Current range: 0.1 A to
1000 A ac
• Frequency range: 10 Hz to
100 kHz
• Accurate displays due to a pas-
sive filter that eliminates noise
and ring on rapidly-
rising di/dt waveforms
• Optional PM9081/001 Dual
Banana Plug Male to Female
BNC Adapter is available for
digital multimeters
• Safety rating: CAT III 600 V
i400
i400s
i200
i200si800
22
Current clamps: AC