User manual

Wireless Multimeter
Features
15
Table 5. Pushbuttons (cont.)
Button
Switch
Position
Function

Not related to
switch position
Push once to turn on the backlight and push again to turn off the backlight. The backlight
turns off automatically after 2 minutes.

All positions
Starts the MIN MAX record function. Steps the display through MAX, MIN, AVG (average),
and input signal measurement. Push for 1 second to stop MIN MAX record.

Not related to
switch position
Selects/deselects the highlighted wireless module in the display. Hold for 1 second to bind
all selected modules to the Product and stop the discovery procedure.
[2]

Not related to
switch position
Moves the highlight in the display to the next wireless module shown in the display.
[2]
Not related to
switch position
Turns on the radio and starts the module discovery procedure.  shows in the display
when the radio is on. Turns off the radio when the radio is on.
[2]
[1] This function will stay in ac or dc when the function switch is moved to another position and back to this function. Even when turned to off and back to
this function.
[2] This button is used when the Product connects with a wireless module. See the “Discovery of Modules” section to learn more.