Datasheet

ManualsBrandsFluke ManualsEnvironmental Testing EquipmentPressure module Fluke;750P23

TECHNICAL DATA

Fluke 750P Series

Pressure Modules

Precision pressure measurement for

750 and 720 series calibrators

The 750P Series Pressure Modules are the ideal pressure modules

to enable gage, differential and absolute pressure measurement

with Fluke 750 and 740 series DPCs and 725, 726 MPCs to

measure pressure.

• Up to 0.01 % reference uncertainty

• 6-month and 1-year specifications

• Temperature compensated 0 °C to 50 °C

• Digital communication to calibrators, no analog

losses or errors

• Broad selection of ranges

• Gage, differential, dual range, absolute and vacuum

measurement models

• Eight (8) Intrinsically Safe models that are certified to:

- NEC-500: Class I Div 1, Groups A-D, Ga

- ATEX: II 1 G Ex ia IIC T4 Ga

- IECEx: Ex ia IIC T4 Ga

* All certifications: Ta = -10 °C to +50 °C

A complete family of pressure modules

A family of 50 pressure modules covers pressure

calibrations from 0 to 1 in H

0 to 10000 psi (2.5 mbar to 690 bar).

Gage pressure modules have one pressure fitting and measure the

pressure with respect to atmospheric pressure. Differential pressure

modules have two pressure fittings and measure the difference

between the applied pressure on the high fitting versus the low

fitting. Each module is clearly labeled for pressure range and media

compatibility. All modules include NPT, metric (BSP) and

M20 adapters.

Summary of content (6 pages)

PAGE 1
TECHNICAL DATA Fluke 750P Series Pressure Modules Precision pressure measurement for 750 and 720 series calibrators The 750P Series Pressure Modules are the ideal pressure modules to enable gage, differential and absolute pressure measurement with Fluke 750 and 740 series DPCs and 725, 726 MPCs to measure pressure. • Up to 0.
PAGE 2
Quick and easy measurements Fluke 750P Series Pressure Modules are easy to use. To measure pressure, connect the pressure module to a pressure source or hand pump and then connect the pressure module cable to the calibrator. Apply pressure from the pressure source and it is displayed digitally on the calibrator. At the touch of a button, the pressure may be displayed in up to 11 different engineering units.
PAGE 3
Pressure accessories Image Description Application Fluke 700PTP-1 Pneumatic Test Pump The Fluke 700PTP-1 is a handheld pressure pump designed to generate either vacuum to -13 psi/-0.9 bar or pressure to 600 psi/40 bar The Fluke 700PTP-1 features an integral pressure adjustment vernier which varies the pressurized volume by 2.0 cc over approximately eleven turns of the vernier knob.
PAGE 4
General specifications Model Parameter/Range Burst Rating6 Differential 750P00 0 to 1 in H2O (0 to 2.5 mbar) 750P3IN 0 to 3 Inch H2O (0 to 7.5 mbar) 750P5IN 0 to 5 Inch H2O (0 to 12.
PAGE 5
General specifications (continued) Model Vacuum 750PV3 750PV4 Dual 750PD2 750PD3 750PD10 750PD4 750PD5 750PD50 750PD6 750PD7 750PD27 Parameter/ Range Burst Hi Side Lo Side Reference Rating6 Media2 Media2 Uncertainty4 Total Total Uncertainty Uncertainty 1-year 1-year1 (15 °C to 35 °C) Total Total Uncertainty Uncertainty 6-month 6-month1 (15 °C to 35 °C) -5 psi (-350 mbar) -15 psi (-1 bar) 4X 316 SS Dry Air ± 0.03 % ± 0.06 % ± 0.07 % ± 0.05 % ± 0.06 % 4X 316 SS Dry Air ± 0.03 % ± 0.
PAGE 6
Ordering information FLUKE-750P00 FLUKE-750P3IN Pressure Module, 0 to 1 inH2O (0 to 2.5 mbar), (0 to 0.25 kPa) Pressure Module, 0 to 3 inH2O (0 to 7.5 mbar), (0 to 0.75 kPa) FLUKE-750P5IN Pressure Module, 0 to 5 inH2O (0 to 12.5 mbar), (0 to 1.25 kPa) FLUKE-750P01 Pressure Module, 0 to 10 inH2O (0 to 25 mbar), (0 to 2.5 kPa) FLUKE-750P01EX* FLUKE-750P22 Pressure Module, 0 to 10 inH2O (0 to 25 mbar), (0 to 2.