User Manual
726
Users Manual
52
bec25f.eps
Figure 23. Calibrating a Chart Recorder
Remote Control Commands
The Calibrator may be remotely controlled from a PC
running a terminal emulator program. The remote control
commands give access to all capabilities of the Calibrator
with the exception of pressure measurement.
HART
Functionality
The Calibrator has a user-selectable 250 Ω HART
to
facilitate use with HART
communication devices. The
resistor can be switched in or out using config selection
menus. Use a HART communicator when measuring mA
with loop power or sourcing mA.