User guide

MAINTENANCE
GyroMixer End User Guide 15
MAINTENANCE
The Miller GyroMixer is designed for simple maintenance. For example, the motor
contains sealed bearings which require no lubrication.
To ensure safe, dependable operation of the paint mixer, follow the maintenance
schedule detailed below.
WARNING Always unplug the power cord when performing
maintenance procedures
.
DAILY
Immediately clean up spills with mild soap and water. A 3/4” drain pipe is
located under the front shelf to aid in cleanup.
• Thoroughly remove soap film with clean, lukewarm water.
• DO NOT clean this mixer with flammable solvents.
WEEKLY
• Inspect electrical cord for damage or wear.
• Clean/scape debris from sliding door track to maintain smooth operation.
MONTHLY
• Clean debris from guide rods for the upper and lower moving arms.
• Lubricate the guide rods and lead screws with graphite grease or
medium weight oil. NO grease or oil should touch the belts or pulleys.