Instructions / Assembly

BUTTERFLY TABLE INSTRUCTION
Preferred tools required are a 1/2" closed end wrench and 1/2" ratchet for leaf and
tabletop.
Step 1: Start by bolting leaf to worm and trunk (do not fully tighten until all
fasteners are in place on entire table).
Step 2: Place tabletop in position and start fasteners (do not fully tighten until all
fasteners are in place on entire table).
Step 3: Snug nuts and bolts gradually by moving from fastener location on leaf and
tabletop with ratchet and closed end wrench.
Step 4: Once the fasteners are consistently tightened then your Butterfly Table is
ready to be used as a table.
BUTTERFLY TABLE INSTRUCTION
Preferred tools required are a 1/2" closed end wrench and 1/2" ratchet for leaf and
tabletop.
Step 1: Start by bolting leaf to worm and trunk (do not fully tighten until all
fasteners are in place on entire table).
Step 2: Place tabletop in position and start fasteners (do not fully tighten until all
fasteners are in place on entire table).
Step 3: Snug nuts and bolts gradually by moving from fastener location on leaf and
tabletop with ratchet and closed end wrench.
Step 4: Once the fasteners are consistently tightened then your Butterfly Table is
ready to be used as a table.