Operation Manual

23
IEGB
The use of the device in the rain or in a
humid environment is forbidden.
The user or operator is responsible for ac-
cidents causing injury to other people or
damage to property.
The manufacturer cannot be held liable
for damage when the blower is not used
in conformity with its intended purpose or
due to incorrect operation.
A leaf vacuum is not intended for
wet conditions! Avoid wet materi-
als such as leaves and dirt, twigs,
branches, pine needles, grass, earth,
sand, mulch, cuttings, etc. Do not use
on wet lawns, grass areas or elds.
Misuse may lead to congestion in the
shredding unit and lead to reduced
functionality. The machine may need
to be completely dismantled and
cleaned. This work should be carried
out by a qualied service technician
and is not covered by guarantee.
General description
The illustration of the principal
functioning parts can be found
on the front and back foldout
pages.
Scope of delivery - Parts list
Unpack the device and check for complete-
ness. Dispose of the packaging material
properly.
- 3-in-1 Electric Leaf Blower
- Blower pipe (2-piece)
- Suction pipe (2-piece)
- Carrying strap
- Collection bag
- Instructions for use
Function description
The 3-in-1 electric leaf blower has a blow-
ing/vacuuming unit for the blowing and
suction functions. In blowing mode, you
can quickly blow together fallen leaves or
blown them out of places that are difcult
to reach. In suction mode, the leaves are
shredded to save space, and blown out of
the ejector outlet into the collection bag.
Refer to the following descriptions for a
functional description of the controls.
Overview
K L M N O P Q R S T
U V W X Y Z
A B C D E F G H I J
1 engine housing
2 volume control
3 handle
4 on/off switch
5 cable strain relief
6 power plug
7 protective cover
for suction intake
8 locking knob for blowing
aperture (not visible)
9 blower pipe (2-piece)
10 auxiliary handle
11a/b attachment eye
for carrying strap
12 carrying strap
13 screw with star grip, suction pipe
14 collection bag
15 fastening eye for catcher
16 suction pipe (2-piece)
17 screw with star grip, additional
handle (not visible)
K L M N O P Q R S T
U V W X Y Z
A
B C D E F G H I J
18 screw with star grip for protecti-
ve cover of the suction intake
K L M N O P Q R S T
U V W X Y Z
A B
C D E F G H I J
19 holding points for collection bag
20 Ventilation opening of collection
bag