Installation Instructions

SuperFast

Reducer Installation

Reducer: This piece of trim is used to smoothly join flooring with different heights such as

vinyl, ceramic tile or carpeting.

Installation:

The reducer has a groove in it, however, it is not meant to click into the existing floor. Apply

a bead of urethane-based construction adhesive into the groove of the Reducer. Fit the

Reducer flush with the floor.

To ensure a tight bond, it’s recommended to place painter’s tape on the newly glued

Reducer until the glue dries (24-48 hrs).

PAGE 1
SuperFast® Reducer Installation Reducer: This piece of trim is used to smoothly join flooring with different heights such as vinyl, ceramic tile or carpeting. Installation: The reducer has a groove in it, however, it is not meant to click into the existing floor. Apply a bead of urethane-based construction adhesive into the groove of the Reducer. Fit the Reducer flush with the floor. To ensure a tight bond, it’s recommended to place painter’s tape on the newly glued Reducer until the glue dries (24-48 hrs).