Installation Manual RSG ERR HET aE CERTIFICATE OF SIFTING IRE RRR ND TT ma CERTIFICATE OF STING IRF IRE AND CERTIFICATE OF BUSTING
J i This product has been inspected 1 and debugged by the factory to Before installing the product, please be sure to remove Nia the best condition. Please do not ny sundries and sludge from the | dissembler and assemble it peripheral fo prevent sundries ! yourself. from blocking the product. % » TOOLS YOU WILL NEED Adjustable chimeric Phillips screwdriver Hig Wrench Two angle valves > Pipe pale Silicone substantially » INSTALLATION Prior to installation: Shut off water supply. Remove old faucet.
3. Brew the nit onto shrank navigating 4, Tighten filing nuts with adjustable wrench, approximately between the ring Do not over tighten! and the sink. Insert the base of 6. Put on washer and fitting 7. Tighten it. side spray. nut, ® 8. Connect and tighten the supply hoses. 9.
Orderings keep the appearance of product clean, bright and good performance, please take care of the product as follows; 1.Rinse with water only and dry with doff cotton cloth; 2. Use mild liquid and colorless glass cleaner to remove surface dirt and scale film, or use polish without abrasive effect; 3.00 not use abrasive detergent, polish, emery doth, paper towel or scraper, ele; 4 Do not use acid cleaner, or cleaner and soap with insoluble gran ete; 5.