3 SEAMOUNTS Item No. WRC24/WRC24B Installation Guide A 4R B QLB ARRANGER QAR RECIPROCATION /%000,0 W 2 220 Ibs Attention Fleximounts.com THISTLEDOWN IT YOURSELF (DIY) PROJECT. DO NOT ATTEMPT THIS 100 kg Per shelf INSTALLATION WITHOUTABASIC UNDERSTANDING OF THE CONTENTS IN THESE ASSEMBLY INSTRUCTIONS. ADDRESS: 4569 Las Posits Rd.
Package Contents @ Shelf Wall Bracket (4 pes) @ Wire Grid (2 pes) @ ¢ ° Installation Template = (1pe) @ Level (1pc) QEE M8x20mm Bolts M8x20-2.5 Bolts Six Angle Lock Nut Wrench 5x5 Hex Wrench (2 pes) (8 pes) (10 pes) (1pc) (1pc) St8x60 Tapping Screw 10x50 Expansion Pipe D8 Washer (8 pcs) (8 pes) (8 pes) el Lt Pencil Pistol-Grip Drill Tape Measure Stud Finder Ladder Eye Protection Screw Driver /Hammer Drill 01 Installation Steps Step 1-A: Attach the shelf wall bracket to wood studs 1.
Step 2: Attach the wire grids to the wall brackets Attach the wire grids (2) to the wall brackets (1), connecting with M8x20-2.5 bolts (6) and six angle 1. Confirm the suitable installation height according to your actual need. lock nuts (7) on either side, and tighten it with wrench (8). 2. Mark the mounting holes using the installation template and level. 3. Baudrillard" (60mm) deep 0.39" (10mm) diameter pilot hole using 3/8" drill bit at the center of each marked point.
Step 3: Place the two wire grids together A\ CAUTION Connect the two wire grids with MBx20mm bolts (5), fix it with 5x5 hex wrench (9), and then tighten the six angle lock nut (7) with ranch (8). This product contains small items that could be a choking hazard if swallowed. Keep these items away from young children. Make sure these instructions are read and completely understood before attempting installation.