Installation Guide

ManualsBrandsFlexco ManualsFlooringDissipativeTile 12-in x 12-in Galaxy Glue (Adhesive) Vinyl Tile

Flexco Floors | 1401 E. 6th St. - Tuscumbia, AL 35674

P: 800.633.3151 | flexcofloors.com | Made in the USA

09.12.2017 | Page 1

TECHNICAL DATA SHEET

STATIC CONTROL TILE

ESD Vinyl

Flexco ESD Vinyl helps dissipate

unwanted static electricity from the

body in areas where static discharge

can damage sensitive equipment

and electronics or cause ignition of

combustible materials. ESD vinyl is

available in Conductive and Dissipative

formulations, depending on the level

of protection required. When wearing

conductive footwear, ESD Vinyl provides

greater mobility in areas that require

static dissipation.

ESD Vinyl attacks voltage generation

at the source; the floor-to-shoe or

floor-to-caster interface. ESD Vinyl is

manufactured with static dissipative

materials that are imbedded within the

product permanently, allowing for long-

term static protection. Flexco provides

a lifetime electrical resistance warranty

for all properly installed ESD Vinyl

installations.

Ideal For:

Healthcare: operating rooms,

radiological areas and anesthesiology

Corporate: server rooms, telecom

rooms and data processing areas

Industrial: electronics manufacturing,

pharmaceutical manufacturing and

chemical laboratories

Government: ammunition facilities,

radar & satellite facilities and data

storage areas

• Contains Conductive Materials

• Does Not Require A Finish

• Lifetime Electrical Resistance Warranty

• Superior Static Protection

• Extremely Durable

• Excellent Chemical Resistance

• Excellent Slip Resistance

• 100% Recyclable

• FloorScore® Certified

Features

Nominal Dimensions:

Finish:

Weight Per Tile:

Quantity Per Carton:

LEED v2009 IEQ Credit 4.1:

ASTM F1700 – Solid Vinyl Tile:

ASTM E648 (NFPA 253) - Critical Radiant Flux:

ASTM E662 (NFPA 258) - Smoke Density:

ASTM F970 - Static Load Limit:

ASTM F970 (Modified) - Max Weight:

ASTM F925 – Chemical Resistance:

ASTM D2047 – Slip Resistance:

Federal Standard Test Method 101c -

Method 4046 (Conductive & Dissapative):

ANSI/ESD STM S7.1:

ANSI/ESD S20.20:

ASTM F150 - Electrical Resistance -

0.25 MΩ - 1 MΩ (Conductive):

1 MΩ - 1000 MΩ (Dissipative):

AATCC-134 - Static Generation (Conductive):

AATCC-134 - Static Generation (Dissipative):

Acclimation Time:

Storage & Acclimation Temperature:

12" x 12" x 1/8"

24" x 24" x 1/8"

36" x 36" x 1/8"

Smooth

1.2 lbs. (12" x 12")

4.5 lbs. (24" x 24")

10.83 lbs. (36" x 36")

45 Tiles (12" x 12")

14 Tiles (24" x 24")

6 Tiles (36" x 36")

Qualifies

Class I, Type A

Class I, > 0.45 W/cm2

Passes < 450

Passes, 250 PSI

2500 PSI

Passes (see list)

> 0.6

Passes, 5000 v to 0 v

in <0.01 sec.

Meets Requirements

2.5 x 10

- 1 x 10

1 x 10

- 1 x 10

< 5 v with ESD Shoes

< 20 v with ESD Shoes

48 Hours

65° - 85° F

Product Description

Technical Data

Approved Adhesives

ASD-800 Acrylic Wet-Set ESD Adhesive

USD-810 Urethane Wet-Set ESD Adhesive

ESD Accessories

To properly ground ESD flooring

installations, all ESD Vinyl orders must

include 1" x 0.004" Copper Grounding

Straps. Product may be heat-welded

with available vinyl welding rods.

Availability, Cost & Samples

Flexco Flooring products are sold

through distribution. To locate the

nearest distributor, visit flexcofloors.

com or send an e-mail to support@

flexcofloors.com.

Technical Documents & Support

Additional product resources and

technical documents are available online

at flexcofloors.com. For additional

technical support, send an e-mail to

solutions@rhctechnical.com.

Additional Information

Summary of content (7 pages)

PAGE 1
ESD Vinyl S TAT I C C O N T R O L T I L E T E C H N I C A L D ATA S H E E T Product Description Flexco ESD Vinyl helps dissipate unwanted static electricity from the body in areas where static discharge can damage sensitive equipment and electronics or cause ignition of combustible materials. ESD vinyl is available in Conductive and Dissipative formulations, depending on the level of protection required.
PAGE 2
ESD Vinyl T E C H N I C A L D ATA S H E E T 1. PRE-INSTALLATION CHECKLIST • • • • • • • • • • • • Consult all associated product literature concerning adhesive installation, maintenance and warranty prior to installation of flooring. Allow all trades to complete work prior to installation. Deliver all materials to the installation location in its original packaging with labels intact. Do not stack pallets to avoid damage. Remove any plastic and strapping from product after delivery.
PAGE 3
ESD Vinyl T E C H N I C A L D ATA S H E E T determine the Moisture Vapor Emissions Rate (MVER) of the concrete. Adhesive MVER Limits ASD-800 Acrylic ESD: 6 lbs. USD-810 Urethane ESD: 6 lbs. If ASTM F2170 or ASTM F1869 test results exceed the prescribed limits, a moisture mitigation product, such as Excelsior MM-100 Moisture Mitigation, must be installed prior to proceeding with installation.
PAGE 4
ESD Vinyl T E C H N I C A L D ATA S H E E T from crack. Joints and cracks should then be sealed with a suitable, elastomeric caulk (such as Ardex Ardiseal Rapid Plus, Mapei P1 SL or equivalent) designed for use in expansion joints. Install a closedcell backer rod at prescribed depth and follow caulk manufacturer’s instructions for installation. Ensure surface is troweled flush with surface of concrete.
PAGE 5
ESD Vinyl T E C H N I C A L D ATA S H E E T proper trowel ridge and spread rate. Periodically lift material to ensure proper adhesive transfer and ensure adhesive has not surpassed the open time – adhesive should cover 90% of tile. Roll material with a 3 section, 100 lb. roller within 15 minutes after installation of the tile section, crossing in a perpendicular direction after initial roll. Use a hand roller in areas that cannot be reached with larger roller.
PAGE 6
ESD Vinyl T E C H N I C A L D ATA S H E E T For further information regarding daily or routine maintenance, please consult the product care & maintenance document or the associated product technical data sheet. S TAT I C C O N T R O L T I L E Grounding Straps provided by Flexco. For additional information, see associated warranty documents. 10.
PAGE 7
ESD Vinyl T E C H N I C A L D ATA S H E E T S TAT I C C O N T R O L T I L E ESD VINYL DIAGRAMS & DETAILS Acceptable ESD Grounding Systems & Methods C A B A. Specific and/or customized ESD grounding system, such as a grounding bar, typically built into facility. Contact electrical or facility representative for detail. B. Steel building column or grounded building framing system. Grounding lug fastened to steel framing per NEC requirements (see Method B Detail below). C.