Manualshelf

Owner Manual

ManualsBrandsFleur De Lis Living ManualsFurnitureAnton Side Chair
12
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that
all components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly
is required.
Page 1 of 2
HARDWARE LIST
A (14) 1/4” x 15mm Allen Bolts
B (14)
Ф6.5
Spring Washers
C (12)
Ф13 x δ1.5
Flat Washers
D (2)
Ф19 x δ1.5
Flat Washers
E (4) Wood Screws
F (1) Allen Wrench
PARTS LIST
G (1) Chair Back
H (1) Seat Base
I (1) Left Support Brace
J (2) Front Legs
K (1) Seat Cushion
L (1) Right Support Brace
QTYPART
14A
12C
HARDWARE QTYPART HARDWARE
2
1
D
F
4E
14B
CARE & MAINTENANCE
:
The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
I
STEP 1 - Figure 1
Begin assembly by attaching each Front Leg (J) to
bottom of Seat Base (H) using 2 Allen Bolts (A), 2
Spring Washers (B) & 2 Flat Washers (C) per leg
from bottom and 1 Allen Bolt (A), 1 Spring Washer
(B) & 1 Flat Washer (C) per leg from top. Do not
fully tighten bolts.
STEP 2 - Figure 2
Next attach Left and Right Support
Braces (I & L) to Seat Base (H)
using using 1 Allen Bolt (A), 1
Spring Washer (B) & 1 Flat
Washer (C) per side.
Do not fully tighten bolts.
FIGURE 2
FIGURE 1
AA
A
A
A
A
A
A
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
AA BB
C
C
A
A
B
B
C
C
H
H
J
J
L

Summary of content (2 pages)