Install Guide - Water Filter Replacement
7
4 FOR INTEGRATED COLUMNS REFRIGERATORS
Installing the new filter
Note: It is not necessary to turn the water supply off when installing the water filter.
G
1
Remove the plastic wrapping from the new filter.
2
Open the water filter hatch to access the filter (A), press the hatch in then pull the hatch down (B).
6
Return the filter tool to its storage position (H).
IMPORTANT!
After installation, the water filter MUSTbe flushed.
Refer to ‘Flushing thewater filter’ for details.
5
Using the filter tool, rotate the filter head
clockwise 90° to lock in place (G).
– If the filter will not turn, ensure the filter is
correctly aligned (D & E), to allow the filter
to be pushed firmly into the filter head.
– Ensure the filter is fully rotated 90°
toallow the water to flow.
4
Align the filter correctly,
ensure the filter handle is
positioned vertically (D) and
the lugs are aligned correctly(E).
Push the filter firmly inside the casing
all the way into the filter head (F).
3
Pull the filter tool gently to dislodge fromthe
front of the appliance (C).
C
A
B
H
F
filter
handle
D
E
lugs