Specification Guide Integrated Column Freezer

PRODUCT DIMENSIONS
in mm
A
Overall height of product 84" 2134
B
Overall width of product 23 3/4" 604
C
Overall depth of product
(excl. front door panel)
24" 610
D
Depth of toekick
(excl. front of door panel)
2 11/16" – 4" 68 – 101
E
Height of toekick* 2" – 6" 51 – 152
F
Depth of door (widest opening)
measured from front of door
26" 660
g
Height of product front panel 79 7/8" 2029
H
Width of product front panel 23 3/4" 604
I
Depth of product front panel
(excludes handles)
3/4" 19
*Standard toekick height is 4" with the optional stainless door panel. For custom door panel installation,
a custom toekick 2" – 6" can be manufactured and fitted by cabinetmaker. The custom door panel
height needs to be adjusted accordingly.
SPECIFICATION GUIDE 24" INTEGRATED COLUMN FREEZER
SPECIFICATIONS
Model No.
RS2484FRJ1, RS2484FRJK1: Note — Left hand
hinge models are a mirrored version of image
shown. RS2484FLJ1, RS2484FLJK1
Dimensions
H 84" x W 23 3/4" x D 24"
Door Clearance
26"
Weight 302 lbs (137kg)
Door Hinge
Hettich KO5
Electrical
Supply 115 VAC, 60 Hz
Service 10 amp circuit
Receptacle 3-prong grounding-type
Plumbing
Supply 1/4" (6mm) comp. stainless steel braided hose
Pressure Min 150 kPa (22 psi)
Max 827 kPa (120 psi) @ 68°F (20°C)
FRONT VIEW PROFILE VIEW ISO VIEW PLAN VIEW
C
D
E
B
A
G
I
H
F
Date: 23.10.2018 | Product dimensions may vary from those shown in this Preliminary Specification Guide. This Preliminary Specification Guide should not be used as installation instructions for any product.
Further information is required to safely and correctly install the products featured here. Specific installation instructions will be available with the product on delivery and on our website www.fisherpaykel.com
REAR OF CAVITY
ELECTRICAL AND WATER CONNECTIONS
MUST BE WITHIN THIS SPACE IF
LOCATED BEHIND THE REFRIGERATOR
FLOOR
LEFT SIDE
OF CAVITY
9"
PLUMBING AND ELECTRICAL
9"
1"
ISO VIEW
CAVITY DIMENSIONS: STANDARD INSTALLATION
in mm
A
Overall height of cavity 84" 2134
B
Overall width of cavity 24" 610
C
Minimum overall depth of cavity* 25" 635
Minimum cabinetry gap clearance
from edge of door panels
1/8" 3
Minimum required finished return,
sides and top of cavity
4" 102
*Assumes a door panel thickness of 3/4"
C
B
A