24in Freezer and 24in Fridge Columns Dual Install Planning File

Model no:
RS2484FLJ1 / RS2484FLJK1 + RS2484SR1 / RS2484SRK1 shown.
(Various models available to swap units to opposite sides, hinge
doors both left, both right or at the outsides as shown here).
(refer page 2 for metric measurements)
IMPORTANT!
For ease of installation, ensure cavity has consistent dimensions top to
bottom and left to right.
Clearance Dimensions in
A Overall height of cavity
84"
B Overall width of cavity
48"
C Minimum depth of cavity*
25"
D Width of supply area behind individual fridge or freezer
24"
e Height of supply area
9"
f Height at sides of supply area
5"
g Width from side of supply area
1/2"
h Combined width in from side of supply areas
1"
i Depth of supply area
1"
Minimum door cabinetry gap clearance
1/8"
Optional Stainless Steel Panel Dimensions in
J Height of door panel
79 7/8"
K Width of door panels
23 3/4"
L Depth of door panels
3/4"
M Height of toekick panel
3 15/16"
N Width of toekick panel
47 13/16"
* With cavity at minimum depth, electrical and water connections must be
within the supply area shown if located behind the appliance, and must not
protrude from the back wall.
Connections may be located in an adjacent cabinet to either side of the fridge.
HANDLES: Handle Kits are sold separately. Shown with handle kit ADH3-RD84.
Other style options available.
DATA SHEET
24" Freezer + 24" Fridge - Custom Panel Integrated Columns
DATE: 10.10.2018
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ±2mm (1/16'').
Please read the installation manual for detailed information on installing the
product. For full installation instructions & specifications visit fisherpaykel.com
ISO VIEW OF 48" CAVITY
(24" + 24")
Stainless Steel Door Panel
RD2484R4D
Stainless Steel Door Panel
RD2484L4D
SUPPLY AREA
m
n
j
e
k
c
l
k
A
B
e
f
d
ghg
d
Stainless Steel Toekick
AKRS48041
RS2484FLJ1 / RS2484FLJK1
RS2484SR1 / RS2484SRK1