User guide

31
USER MAINTENANCE INSTRUCTIONS
Cleaning the drain filter and filter plate
IMPORTANT!
●
If a dishwasher cleaner / descaler is used, you must run a wash programme with
detergent immediately afterward to prevent any damage to your dishwasher.
●
The dishwasher must be used with the filter plate, drain filter and spray arm correctly
in place.
●
We recommend that you always use the dishwasher with the right hand fixed tine
plate rack or fold down tine rack (depending on model) in place.
Remove the fixed tine plate rack and/or the base rack first
1 Unplug the dishwasher or turn it off at the power supply.
Note: For ease of access to the drain filter and filter plate you may find it easier to
remove the whole base rack first.
To remove the whole base rack: lift the rack up from the back first to prevent it knocking
against the detergent and rinse aid dispenser and lift out.
2 If the base rack is left in - to then access the drain filter:
●
Remove the cutlery basket
●
Lift the trap door up
●
Lift the front of the fixed tine plate rack to unclip it from the base rack
●
Slide the fixed tine plate rack forward clear of the rear anchoring loop and lift out.
Fixed tine plate rack-rear
rear anchoring loop
Stop
Lift trap door up
Fixed tine plate rack-front