Quick Start Guide

DOS AND DON’TS OF LOADING
PREFERENCE OPTIONS
FOR MORE INFORMATION
DURING AND AFTER THE WASH
During the wash the button on the dishwasher door will be illuminated.
At the end of the wash the dishwasher will beep six times and the button will stop being illuminated.
You may notice the following noises at the end of the wash. These are all part of normal operation:
●
Both drawers may be draining simultaneously.
●
The drying fan may continue to run after a wash program has finished for a set time or until the drawer is opened.
The fan assists with drying and uses negligible amounts of energy.
For best drying results, we recommend unloading the dishes within a few hours after a wash program has finished.
A neatly arranged load with evenly
spaced dishes helps wash performance.
Sharp or pointed items must be placed
horizontally or with sharp edges/points
facing down to avoid risk of injury.
Overcrowding reduces wash
performance.
Protruding items will stop the
internal lid of the dishwasher from
sealing properly, which could result
in a service call.
Ensure there is enough space between
plates. Mix spoons, knives and forks
within the cutlery basket to prevent
them from nesting.
If plates and cutlery are nesting,
they are less likely to be cleaned
well.
Ensure that water reaches all
items on the racks.
Dishware is blocking water from
reaching items on the racks.
You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the most suitable
settings before you start using your dishwasher.
OPTION RINSE AID
WATER SOFTENER
(SOME MODELS ONLY)
OPEN DRAWER
AUTO POWER-ON
(SUITABLE AS A
SABBATH OPTION)
TURN TONES OFF
CLOSED DRAWER
AUTOLOCK
What
does
it do?
Regulates the amount
of rinse aid dispensed.
Reduce this setting if
there is excess foam after
a wash. Increase this
setting if dishes are wet
or streaky after a wash.
Refer to the ‘Water
softener’ section of
the ‘User guide’ for
details.
Your dishwasher
is factory-set to
automatically power
on for 30 seconds
whenever you open
the drawer.
You can turn this
setting off.
This turns all
tones off except
for fault alerts.
When this setting is on,
the drawer will automatically
lock 30 seconds after it’s
closed.
It can then be unlocked
by knocking once on the
dishwasher door. Useful in
boats or motor homes.
For detailed information on the
features of your dishwasher
For warranty information
If you…
●
have any questions or comments
●
need a Fisher & Paykel authorized
technician to service your product
●
need replacement parts or accessories
●
want to register your product
see your ‘User guide’
see your ‘Service and warranty’ booklet
see your ‘Service and warranty’ booklet
or contact us via our website:
www.fisherpaykel.com
How to change the setting of an option
1 CHECK
Check that there is no wash underway, then open the drawer.
2 ENTER MENU
To enter the menu: Press and hold the and together for four seconds.
●
You are now in the Rinse aid option of the preference options menu.
●
To change the Rinse aid setting, go to step 4 now.
3 SCROLL TO OPTION
Press to scroll to the next option. The wash modifier indicators will display which option is selected (see table below).
When you have scrolled to the end of the sequence, the menu will start again with Rinse aid.
4 CHANGE SETTING
Press to change the setting within an option.
The wash program indicators will display which setting is selected (see table below).
5 SAVE SETTING & QUIT MENU
Press to save the new setting and quit the preference options menu.
Double models only:
You can use either drawer to change the settings. Changing the settings in one tub will set your preferences for the whole dishwasher.
591379 A 08.17
OPTION RINSE AID
WATER SOFTENER
(SOME MODELS ONLY)
OPEN DRAWER
AUTO POWER-ON
(SUITABLE AS A
SABBATH OPTION)
TONES AT END
OF WASH
CLOSED DRAWER
AUTOLOCK
Which option
am I in?
Possible
settings
0 to 5 (max) 0 to 5 (max) On or Off On or Off On or Off
Example
4 indicators lit = setting 4
1 indicator lit = setting 1
On
Off