Manualshelf

Dual Installation Guide

ManualsBrandsFisher Paykel ManualsAppliances4 Piece Kitchen Appliances Package with RS36W80RJ1N 36" Built In Refrigerator, OR30SDG4X1 30" Gas Freestanding Range, HC30DTXB2 30" Wall Mount Convertible Hood and DD24DCHTX9N 24" Full Console Dishwasher in Panel Ready
78910111213141516
Table Of Contents
9
IMPORTANT!
Follow these steps for fitting the cavity bracket on the non-hinge side of both left and
right hinge appliances.
Attaching cavity bracket to appliance
1 Screw the cavity bracket with two M5x8 countersunk Phillips screws (A) to the location
where the hinge bracket was removed.
Ensure that the top face of the front trim is parallel to the appliance.
2 Shift the M5x10 pan head Phillips screws into the slots in the cavity bracket. (B).
If the front trim is not parallel to the appliance, screw M5x12 socket head cap screw (C) to
adjust the trim position.
3 Once the top trim is parallel to the appliance, secure the cavity bracket with another M5x8
countersunk screw (D).
C
D
A
B
8 ATTACH CAVITY BRACKET