Datasheet

- 2 -

Application :

Handling and working conditions are normal ambient conditions, i.e. room temperature

about 21 °C and air moisture level in a range of ca. 40 – 50 % relative humidity.

Mixing ratio of resin to hardener of 10:1 by weight.

Stir both components thoroughly for approx. 5 minutes.

The surfaces to be bound are have to be free from oxides, dust and grease.

To remove surface contaminations as dust, grease, oil, etc., solvents (Aceton, thinners, Tri etc.)

should be used. Do not use “denaturated alcohol” or glass-cleaners.

Roughened surfaces increase the binding strength.

Apply glue onto both sides of parts you want to adhere, thereafter join both the parts

The processing time is approx. 45 minutes (potlife).

Note: Be sure to read and follow the manufacturers´ precautions and directions when using

solvent, primers and other chemicals.

Curing time :

at 120°C approx. 20 minutes

at 65°C approx. 45 minutes

at 25°C approx. 8 hours

at 20°C approx. 24 hours

Long term stability if handled, processed and cured properly in accordance with the

specifications: min 20 years

Storage and shelf life :

Storage in closed containers between +4°C and +51°C.

The influence of frost is to be avoided.

The shelf life for unopened glass containers is min. 2 year,

for unopened plastic containers is min.1 year

The thermal resistance of the adhesive film can be calculated by using the following formula:

: Thermal resistance in °C/W

p : specific R

= 120°C.cm/W

t : film thickness in cm

A : surface area of film in cm

All statements, technical information and recommendations herein has been thoroughly prepared and checked,

but the accuracy or completeness thereof is not guaranteed. User is responsible for determining whether this

product is fit for a particular purpose and suitable for users´ method of application. Please remember that many

factors can effect the use and performance of this product in a particular application.

We reserve the right to correct any errors and faults, especially to technical modification as a result of constant product

development and improvement.

= p x t / A