User's Manual

FB155BC User Guide Version 2.1
11 How to complete PC Configuration?
Page 26 / 2
(4) Basically, the Hyper Terminal does not show the entered character. To make sure of the entered
character, select [File]
[Properties] on the Menu, then registration information window will appear
shown as on <Figure 12-9>, click the ASCII Setup button.
<Figure 11-10 Hyper Terminal Set Up Window 5>
(5) As shown on <Figure 11-10>, Check “Echo typed characters locally” and come out pressing the
acknowledge button. Now the Hyper Terminal program setting procedure is completed to use PC
Configuration.
(6) If the power is on in pressing the FASET button (The 4th switch in <Fig. 6-1>) on interface board,
the menu like the <Fig. 11-11> is printed on the hyper terminal.
<Figure 11-11 Pc Configuration Menu>