Owners Guide

15
COUNTERTOP OVERHANG
The control panel is designed to sit fl ush against the enclosure front wall. If the enclosure countertop extends
beyond the front wall, creating a countertop overhang, it must be cut fl ush with the front wall for the width of the
control panel or a gap will be created exposing the forward portions of the left and right side fi re walls of the
unit. See illustrations above.
ENCLOSURE VENTILATION
FOR YOUR SAFETY, you must provide openings in the enclosure for replacement air and ventilation (in case of
possible leakage from gas connections or propane cylinders). Failure to do so may result in a fi re or explosion
causing property damage, bodily injury, or death. See the ENCLOSURE / VENTILATION REQUIREMENTS
section for details.
MODEL SPECIFICATIONS (cont.)
The increased dimensions for combustible enclosures allow for a required air gap along the sides and rear of the unit. See
the COMBUSTIBLE ENCLOSURE CUT-OUT section on the next page for details.
Includes any substrate at front wall of enclosure (in the area the rear of the control panel is to sit fl ush against). See
SUBSTRATE section on next page.
Only applicable for enclosures that have countertops with an overhang (see illustration and section below).
TOP VIEW
(Countertop)
Lower support
Countertop
overhang
Control
panel
ENCLOSURE
CUT-OUT
DIMENSIONS
Fig. 15-1
FRONT VIEW
B
C
D
See next page
for substrate
considerations
Countertop
overhang
X
TOP VIEW
SIDE VIEW
Countertop
overhang
(Control
panel)
(Countertop)
Y
1
/
4
"
Clearance
(Overhang)
X=
7
/8"
Y= Total
Countertop
Overhang
A
Control
panel
Check
clearance for
control panel
removal
CUTOUT DIMENSIONS TABLE
Single Sideburner Double Sideburner
Non-combustible
enclosures
Combustible
enclosures
Non-combustible
enclosures
Combustible
enclosures
A Countertop to unit bottom cut-out 12" 12" 12" 12"
B Side to side cut-out 11-
1
/
2
" 12"
11-
1
/
2
" 12"
C Front to back cut-out 14" 14-
1
/
2
"
22-
3
/
4
" 23-
1
/
4
"
D Control panel width cut-out 12-
5
/
8
" 12-
5
/
8
" 12-
5
/
8
" 12-
5
/
8
"