Owners Guide

To install using a power supply box (not included):

1. Install the power supply box at least 12 inches below the

bottom of the sideburner.

2. Fasten the power supply box to the inside of the enclosure.

3. Connect the power supply box connectors to the

sideburner wire harness extension, as shown in Fig. 21-1,

A (molex and ground wire connections).

4. Connect the sideburner wire harness extension to the

sideburner, as shown in Fig. 21-1, B (molex and ground

wire connections).

5. Connect the cord coming from the power supply

box to a 120VAC (15 AMP minimum) GFCI

GROUNDED 3-wire receptacle. See Fig. 21-1,

C, and 21-2. The GFCI receptacle must be a WEATHER-

PROOF IN-USE COVERED RECEPTACLE.

WARNING: Electrical Grounding Instructions - The

power supply box is equipped with a three-

pronged (grounding) plug for your protection

against shock hazard and should be plugged

directly into a properly grounded three-

prong receptacle. Do not cut or remove the

grounding prong from this plug.

INSTALLATION (cont.)

Fig. 21-2 Connect power cord

3-wire GROUNDED

cord from unit

120VAC (20 AMP minimum) GFCI

GROUNDED 3-wire receptacle

Fig. 21-1 Connect sideburner to power supply

Sideburner

wire harness extension

Power supply

box