Installation Instructions

Drippings from grilling flow through specially

designed channels and collect in the drip tray.

Check the drip tray regularly and empty when

required.

Your grill includes a pack of four (4) Fire Magic

drip tray liners (Fig. 28-1). For your convenience

in cleanup, place a liner into the drip tray before

grilling.

To ﬁ t a liner into the drip tray, pull out the tray and

set it on a ﬂ at, level surface. Place the liner in the

drip tray as shown in Fig. 28-2 and carefully insert

the tray back under the control panel.

Note: Be sure that the liner is properly placed into

the the drip tray. The front of the liner must

ﬁ t under the drip tray's lighting instruction

plate (see 28-3 detail).

After each use, wait for the grill to cool and carefully

pull out the drip tray to check it. When a liner is

nearing full, carefully lift it out of the drip tray, lifting

with both hands to keep the tray level until it is

safely discarded. Then insert a new drip tray liner.

Order more drip tray liners through your local Fire

Magic

dealer.

Note: The foil tray liner is also useful for setting on

burners to cover them and catch drippings

directly during rotisserie only cooking.

Note: For models with match holders attached

inside the drip tray, place the match holder

off to one edge of the pan (Fig. 28-3). If

necessary, mold the foil liner around them

and the other features of the tray to create

enough clearance space to open and close

the tray without catching the liner.

Fig. 28-1

Be sure liner ﬁ ts under lighting instruction plate

Pull out the drip tray and place liner

Fig. 28-2

Fig. 28-3

Note: There are easy to follow lighting instructions

etched onto the top of the drip tray handle.

FIRE MAGIC

DRIP TRAY